ZGB-1 corrugated flame arrester Overview:
This product is widely used in oil storage tanks, is to prevent
accidental fire invade the tank, to prevent accidents, is the ideal
product for tank fire.
ZGB-1 Corrugated flame arrester performance and features:
The flame arrester has the advantages of reasonable structure,
light weight, corrosion resistance and explosion-proof performance,
and can withstand fire for 13 times in a row with a subsonic flame
Flame arrester easy to repair, easy to install, do not check when
removing the breathing valve.Resistance to burning qualified, resistant to burning test 1 hour
The flame arrester core is stainless steel, corrosion-resistant and
easy to clean.Shell hydraulic test qualified.
ZGB-1 corrugated flame arrester Scope:
The flame arrester is suitable for pipes, flash point of less than
28Class A, oil, hydrogenated liquefied and flash point of less than
60of kerosene, diesel, a stupid, crude oil And so on, can be used
with the respiratory valve supporting the use, but also can be used
alone, within the floating roof tank vent, gas tank on the ground
floor gas tank.
Corrugated flame arrester repair and maintenance:
In order to ensure the performance of flame arrester to achieve the
purpose of safe use, flame arresters should be regularly checked
Flame arresters are inspected semi-annually to check if the fire
barrier core is clogged, deformed, etched.
It is found that the plugged flame barrier core should be cleaned
to ensure that each hole in the core is clear and that the fire
barrier should be replaced for deformation and corrosion.
When reinstalling the flame retardant core, ensure that the joint
surface is tight and leakproof.
Corrugated flame arrester parts material:
|Body material||Carbon steel WCB, stainless steel 304,316|
|Fire retardant core material||Stainless steel explosion-proof corrugated plate|
|Sealing material||Asbestos rubber, PTFE PTFE|
|Ambient temperature ℃||≤480|
|Nominal pressure (MPa)||0.6 ~ 5.0|