economica professional water filling machine supplier
This Automatic 3-in-1 Wash-filling-capping Water Filling Machine is
used to produce bottled mineral water, purified water, flavored
water, alcoholic beverage and other non-gas Liquid. This Machine
can be applied to all kinds of plastic products such as PET, PE.
Bottles size varies from 250ml-2000ml meanwhile few changeover is
needed. This series of filling machine capacity varies from 1000BPH
1. The machine concept of the CGF series was specifically designed
for bottling in a hygienic environment;
2. Thanks to the free-standing transfer starwheels, there are much
less exterior surfaces on the fillers than on conventional systems;
3. This innovative design has also the effect of the machine being
very easily accessible for maintenance purposes and that it can be
expanded at any time without conversion, for example with an
additional cap feeder;
4. The OMRON PLC system offers the ideal solution for conductive
non-carbonated fill products, as the fill quantity is measured
precisely by an inductive flow meter;
5. All filling process steps can be programmed easily and
individually adjusted to the product to be filled and to the
6. With all variants of the CGF series for non-carbonated products,
the containers are conveyed through the machine by means of
neck-handling. This, as well as fill quantity determination via
inductive flow meter (IDM) guarantee high flexibility and short
7. Depending on the pitch circle, a central or a tubular ring bowl
8. Product feed pipes connect the product tank with the filling
valves. In each connecting pipe, there is an inductive flow meter
which measures the quantity of the product flowing through the
pipes via the product’s conductivity;
9. The filling process begins after centring of the container and
is effected by the free-jet method;
10. In order to be able to cope with the different bottles and
products to be filled, one or two filling speeds are available.
Non-carbonated beverages are filled pressureless in multi-chamber
11. Once the preprogrammed amount of liquid has flown into the
container, a flow meter signal will trigger closing of the valve;
12. The fill parameters and programmes are stored in the controller
making quick change-overs via touch-screen.
Change-over to other products or filling temperatures is done
quickly, easily, and it is reproducible.
Short change-over times
Very short change-over times made possible via neck-handling parts
and changes of the filling volume via touch-screen selection or
easy filling programme selection.
Hygienic bottling conditions
Minimised surfaces on the filler’s exterior thanks to freestanding
transfer starwheels. Mechanical drive units such as gears and joint
shafts have been replaced by closed servo drives.
This machine is well accessible so that all maintenance and service
jobs can be performed easily.
The design of the filler enables retrofitting of another capper or
the creation of a Bloc with rinser, blow moulder, or labeller.
Filling line includes:
- Water treatment
- Blow molding machine
- Air conveyor
- Rinsing-filling-capping 3-in-1 monoblock
- Sleeve / OPP labeler
- Air dryer, visual inspection, ink jet printer
- Shrink wrapper / wrap-round case packer