Fiberglass mesh protects plaster layer surface from cracking
Plastering mesh glass cloth is used for reinforcement surfaces during plastering, installation
leveling floors, waterproofing, restoration of cracked plaster in
order to prevent cracking or fraying of the plaster.
Fiberglass mesh is cheap material that does not burn and is characterized by both
low weight and high strength. These properties allow it to be
successfully used in the formation of plaster facades, as well as
use on internal wall and ceiling surfaces. This material is widely
used for fastening the surface layer at the corners of the room.
Most widely used standard fiberglass plater mesh is the density of
145g/m2 and 165g/m2 for exterior cladding and facade work. Resistant to alkalis, does
not decompose and will not rust over time, it does not emit toxic
and harmful substances, has a high resistance to tearing and
stretching, protects the surface from cracking and improves its
mechanical strength. Easy to handle and use.
Our fiberglass plaster mesh sizes:
Plastering mesh facade fiberglass cloth 90, 140, 145 , 160, 165,
Mesh shape: square.
Mesh size 55mm, 44mm, 22mm.
Color: White, yellow, blue, green, red, orange.
Roll size: 150m.
FM-01: 2mm mesh size fiberglass cloth with high resistance to tearing and
FM-02: Fiberglass cloth rolls in white, yellow, blue, green, red, orange
FM-03: Plaster fiberglass mesh protects the wall surface from cracking
and improves its mechanical strength.
FM-04: Fiberglass mesh as reinforcing mesh for plaster work is easy to
handle and use.
Application of plaster fiberglass mesh
- Fiberglass mesh is used to strengthen the surface of the plaster
layer all kinds of buildings.
- This mesh reinforced liquid waterproofing layers slabs and roofs.
- Fiberglass mesh used to impart mechanical strength filler floor
coverings that are different self-leveling properties.
- Application of glass fiber mesh contributes to strengthening
plaster, and the bases used for laying ceramic tiles.
Drywall Fiberglass Tape
Drywall fiberglass not-sticking tape and fiberglass self-adhesive
tape are used for combining the joints between walls and windows,
door together with our fiberglass mesh to repair the cracks, joints
and seams of drywall, plasterboard and other surfaces. Drywall
fiberglass not-sticking tape should be used with cellophane tape.
Fiberglass self-adhesive tape could be used alone.
FM-05: A length of fiberglass tape is used for conjunction of drywall
FM-06: Two rolls of fiberglass tape used for gluing drywall.
- Length (m): 20, 30,40, 45, 50, 90, 100.
- Width (mm): 35, 45, 40, 45, 50, 75, 100, 200.
Table 1: specification of drywall fiberglass tape
|Class||Design||Density/25 mm||Weight (g/m2)||Tensile strengthN/5 cm20 cm||Weaving type||Resin content (for self-adhesive) ％|
Application of drywall fiberglass tape
- Connecting gypsum board, particle board, hardboard and other sheet
- Gluing joints of door and window frames to the walls.
- Sizing of cracks, corners and joints in concrete, plaster surfaces.
- For continuous reinforcement of walls and ceilings.
Benefits plaster reinforcing mesh and tape:
- Resistant to alkalis;
- Does not decompose and will not rust over time