Fruit and Vegetable Juice Extractor
LME - Fruit and Vegetable Juice Extractor is applicable to tomato,
pineapple, carrot, apple, aloe, cactus, and so on .all fruit and
vegetable contains a certain fibrous materials, and dehydration
operations, such as fresh Grape (broken after the separation by the
juice) and the fermentation of grape pomace, sea buckthorn fruit,
aloe, ginger; lees after fermentation, dehydration and cassava
residue wood, wheat straw, rice straw, reeds, etc. as raw materials
and semi-chemical pulping all chemical pulping black liquor
extraction and dehydration after washing. At the same time the
sludge dewatering, waste also has wider application.
Juice Extractor Features and Working Principle
There are racks of the equipment, feed section, press section,
transmission parts, electric parts, has high strength, load
pressure, no deformation, clogging, corrosion resistance, wear
resistance, non-skid, easy maintenance, long service life
characteristics.
Helical screw conveyor and press both counter-rotating spiral
double helix to do, but also with a strong feed back device and
only a single screw device (sub feed screw, screw press, screw
extrusion of three parts), but also pitch, shaft sieve tube
diameter and diameter changes in a single spiral, more about
cross-cutting as a parallel counter-rotating double helix,
depending on the materials and production to choose a different
spiral forms. The device can be used alone, or you can use more
than one series, the effect is better. Slag export oil by adjusting
the spring pressure or pressure can change the effect of materials,
and to adjust the level of wet and dry slag, the effect will be
some differences due to different materials.
The device relative to the horizontal screw machine, filter press,
vacuum filter unit of the screw press and the general cost is
particularly high, the effect is odd is good, widely used in wine,
juice and other fruit juice industry, brewing, chemical,
pharmaceutical and other industries solid-liquid separation of
materials by the local press material moisture content after
dehydration 60% (depending on different materials, a difference).
Main technical parameters:
Model | LME-1.5 | LME -5 | LME -10 | LME-20 | LME-40 |
Production capacity (t/h) | 1.5 | 5 | 10 | 20 | 40 |
Dimensions (mm) | 1900*600*1200 | 3500*1000*1300 | 3750*960*1300 | 4950*1100*1730 | 6000*1300*2000 |
Total power (KW) | 7.5 | 7.87 | 11.37 | 15 | 22 |