Home > Hair Curler >

REMOVABLE INSULATION JACKETS for STEAM

REMOVABLE INSULATION JACKETS for STEAM
Country/Region china
Company Thermaxx, LLC COMPANY
Categories Thermal Insulation Jackets
Telephone 203-932-9639
ICP License Issued by the Chinese Ministry
  • Product Details
  • Company Profile

REMOVABLE INSULATION JACKETS for STEAM

1.3 PREFORMED THERMAL JACKETS
A.Manufacturers
1.ThermaXX LLC 16 Hamilton Street West Haven CT 06516
B.Insulation
1.For Box Type Jackets
High-temperature insulation blanket formed of silica Aerogel and reinforced with a non-woven, glass-fiber batting.
Insulation must be hydrophobic
Estimation of Maximum Use Temperature 1200°F (650°C)
2.For Non Box Type Jackets:
Glass mat, type E needled fiber. ”, " @ 9 LB/CF & 1" @ 11.3 LB/CF.
Estimation of Maximum Use Temperature 1200°F (650°C)
3.All insulation materials shall be Non-Asbestos
C.Jacket
1.Hot Side
LFP 2109 pure PTFE 13.5 oz per square yard
Estimation of Maximum Use Temperature 550°F (287°C)
2.Cold Side
PTFE Fiberglass Composite Jacketing, 16.5 oz/sq. yd. minimum
Estimation of Maximum Use Temperature 600°F (315°C)
D.Thread:
1.Begins to decompose at about 800 degrees (400 degrees C).
2.Does not melt
3.Diameter- .0114
4.Break Point 35LBS
E.Construction:
1.Double sewn lock stitch with a minimum 4 to 6 stitches per inch. Jackets shall be sewn with two (2) parallel rows of stitching using thread in section 1.3D. The thread must be able to withstand the skin temperatures without degradation.
2.Hog rings, staples and wire are not are not acceptable methods of closure.
3.No raw cut jacket edges shall be exposed.
4.Jackets shall be fastened using hook and loop (Velcro) straps and 1” Slide Buckles.
5.All stitching will be done with thread in section 1.3D.
6.Provide a permanently attached Aluminum or stainless steel nameplate on each jacket to identify its location, size and tag number.
7.Provide a stainless steel or brass grommet at the low point of each jacket, in wet areas for moisture drain (on horizontal jackets as required).
8.The insulation shall be designed to minimize the convection current in the space between the hot metal surface and the inner layer of insulation. To this end, during jacket fabrication, the layers of insulating mat shall be placed in an overlapping pattern.
9.All jacket pieces which match mating seams must include an extended 2" flap constructed from the exterior fabric and shall be secured using hook & loop closure (i.e. Velcro TM) parallel to the seam.
10.Insulation must be sewn as integral part of the jacket to prevent shifting of the insulation.
11.Steam Trap and Steam Trap Station Jackets must be constructed in a box shape for removal and replacement inspection ease.
1.4COMPONENTS TO BE JACKETED
A.GATE, GLOBE and CHECK VALVE Type and Insulation Thickness Schedule
Crane
Nibco
Velan
Hammond
Sarco
Stockham
B.WYE STRAINERs to be Jacketed
Keckley
Hoffman
Mueller
Nibco
C.STEAM TRAPs to be Jacketed-Box Type Jacket
1.Inverted Bucket
Armstrong
1)Series 800-813
2)Series 814
3)Series 880
Spirax Sarco
1)Series B
2)Series 200
Hoffman
1)Series B0, B1, B2, B3, and B4
2.Float and Thermostatic-Box Type Jacket
Armstrong
1)Series A&B
Spirax Sarco
1)Series FT
Hoffman
1)Series H&I
D.PRV Types and Insulation Thickness Schedule
Spence
1)Series E
Sarco
1)Series P
Hoffman
1)Series 2000
Leslie
1)Series G
E.Other Flanges, Unions, ETC
As required
1.5JACKET PERFORMANCE & INSULATION THICKNESS
A.Insulation thickness: As required for Touch Temperature
1.Exterior of all jacket < 120F
END OF SECTION
Cheap REMOVABLE INSULATION JACKETS for STEAM for sale
Send your message to this supplier
 
From:
To: Thermaxx, LLC COMPANY
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly