Epoxy stone glue(slow dry)
This product is double component, room temperature curing strength
stone material structural adhesive, easy operation, low stress,
thermal expansion coefficient is close to stone. Wear-resisting,
water resistance, anti-ageing, resistance to cold and hot
alternate; Color shallow, easy to match color, it has good adhesion
and repair effect for stone material .
Scope of application
Mainly used for various materials such as stone, ceramic tile,
concrete, metal bonding and repairing, such as the bedplate and
special shape stone, arts and crafts processing, Roman column,
stone carving, culture stone, also can be used for repairing the
stone material surface uneven.
Method of application
1. The adhesive part should be clean, dry, remove impurities such
as dust, oil pollution;
2. After mix well the glue according to regulations, apply with
stone glue bonding parts, press the fixture, motionless and solidification; you can do the next procedure after 24 hours
curing in room temperature; The low temperature in winter, can heat the plank after coating at 50 to 60 ℃, placed into next working procedure after 2-3 hours;
3. According to different color stone to add special toner which
color is closed to stone color, at most quantity of toner is 5% of
4. Squeeze out excess adhesive bonding parts, before curing can use
cloth to dip small amount of alcohol or acetone to clean.
1.Glue must be mixing as proportion to avoid affect the use effect;
2. The construction temperature cannot be lower than 5, heating in
winter in order to improve the curing rate and the bonding
3. Matching the glue when you use, should not mix too much for
one-time, the glue must be finished within the available time, do
not use it after becoming gel; The higher the temperature of mixing
and the more quantity of the glue, the available time will be
shorter, or it will be longer;
4. It must be pressurized and solidification after bonding
plurilateral, do not move the stone before the glue completely dry;
5. Do not mix container of components A and B , do not put the
residual blended adhesive liquid back to the original packaging;
6. If the viscosity pf adhesive is bigger, not convenient to use,
can add 3% of anhydrous ethanol or acetone in glue to dilute, also
can be heating at 40-60water to reduce its viscosity.
7. Do not mix cover the lid, cover tightly after using, do not eat;
8. Because of the stone material, chemical and physical properties
are different, please try in advance before using this product, so
as to avoid mistakes!
Shipping and Package
1.The sealed store in a cool and dry ventilated place, valid for
one year, expired after inspection qualified can continue to use;
2.Non-flammable, non-toxic after curing, it can be mailed,
3.Packaging specifications: 18/group (9 kg/barrel).
Executive standard: Q/BUEZ 003-2005
Reference dosage：2.5 Kg/m2