Home > Copper Ore >

Gold Wash Sluice-3 chutes Gold Wash Sluice-3 chutes

Country/Region china
Company Pioneers Mining company
Categories Gold Separator Machine
Telephone +86-797-5711800
ICP License Issued by the Chinese Ministry
  • Product Details
  • Company Profile

Gold Wash Sluice-3 chutes Gold Wash Sluice-3 chutes

Gold Wash Sluice-3 chutes

Capacity:40 dry tons per hour

Pour:【ZS40】The sluice unit by Pioneers factory provides the use of suction gold blanket washing primaries, and use of the specific gravity difference & mercury amalgamation and a secondary magnet magnetic separation.
The gold washing sluice unit ZS-40 by Pioneers Mining is designed and manufactured after soliciting opinions and demands from users, in line with the properties of geological gold ores and viscosity of ore sand and in response to treatment of placer gold crude ore and massive sand tailings, recovery of fine particles and slight gold and further improvement of gold recovery rate.
  • Get a Quote
  • Send Inquiry
  • Introduction
  • Specification
  • Customer Case
  • Start Order
  • Chat Now!
Structure and Mechanical Features
Placer Gold contains a number of heavy minerals in addition to gold and is commonly associated with magnetite ,ilmenite, rutile, zirconium quartz, hematite, ferrochrome, iridium, cinnabar, tungsten, manganese, tin, diamond, corundum, calcite and other heavy minerals with its content being 1-3ktg/m3 as well as gravel, cobble and soil. Presence of magnetic iron componets and soil is not favorable for recovering fine gold in the process of gold dressing. Efforts should be made to conduct breaking, screening and desliming operations in the period of preconcentration. Consideration should be given to comprehensively recovering the heavy metal elements with desirable indexes available. Normally, placer gold occurs in granular, flaky, branched and needle shapes with 0.3-10g/t in grade and 0.2-2mm in size, Preference should be give to gravity concentration in alluvial gold ore dressing. Also, consideration should be given to comprehensively recovering other heavy minerals by combined use of gravity, flotation, amalgamation, magnetic separation processes to separate minerals.
The gold washing sluice unit by Pioneers Mining is designed and manufactured after soliciting opinions and demands from users, in line with the properties of geological gold ores and viscosity of ore sand and in response to treatment of placer gold crude ore and massive sand tailings, recovery of fine particles and slight gold and further improvement of gold recovery rate. The applications by the major users at mainland and abroad showed that the unit could handle large capacity of ore sandwith high washing cleanliness and gold recovery rate. The pioneers gold washing sluice unit can recover not only granular gold and platy gold but also fine grained cold and slight gold and is considered as relatively advanced and strongly adaptable placer gold separation equipment.The sluice unit by Pioneers factory provides the use of suction gold blanket washing primaries, and use of the specific gravity difference & mercury amalgamation and a secondary magnet magnetic separation.
Production Process:
  1. Run-of-mine placer gold is hauled by bulldozer and excavator into screening scrubber machine for breaking, classification and desliming prior to being delivered into ore box of chute,where minerals slurry along the conveyor belt to the lower stream, which attract not moving conveyor belt, suck gold surface gold belt / blankets.
  2. Facing the conveyor belt suction gold sand flow in the opposite direction of rotation, transmission drive sets water nozzle after the completion of a Single wash sand beneficiation delivery cycle , time is about 5 minutes; Transmission in turn drives two rotating blanket/belt chutes, dual uninterrupted alternately so you can extract gold in alluvial ore and other minerals.
  3. Suction gold blanket belt corresponding to the inlet end and a guide groove or a catheter connected, guide at the other end of the channel or conduit is connected through a separation tank and ore sorting device, separation trough level at the bottom of the groove is arranged in the mercury separation tank, mercury surface below the groove bottom surface, pulp and liquid mercury amalgamation,extract final gold.
  4. The bottom surface of the terminal end of the notch is provided with notches corresponding points the other side of the election in the disc with a sorting magnet to move iron minerals.Option slot beneath the stars with a discharge chute, discharge tank with a mercury recycling funnel, below the sub tray selecting sorting conducting port side of the connector,discharge a small amount of mercury,also recyclable.
The Pioneers washing sluice unit has the advantages of simple operation, reliable work, compact structure, high separation
Cheap Gold Wash Sluice-3 chutes Gold Wash Sluice-3 chutes for sale
Send your message to this supplier
 
From:
Enter your email please.
To: Pioneers Mining company
Subject:
Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly