Track Part Railway Sleeper Spike
1.The screw spike material is Q235-A steel, technical requirements
should be consistent with GB700.
2.The upper thread screw spike is M24, the basic size shall comply
with the provisions of GB196, making thread tolerances as specified
in the GB197 8g.
3.The lower part of the thread spiral spike for M25.6 x 6 -
d24.0/25.6 threads, teeth as high as 3.25 - 00.25mm.
4.At the end of the spiral spike manufacturing according to the
provisions of GB2. 4.5.1 cone surface of the spiral spike burst
fracture is not allowed to extend to the forging shaft.
5.2The upper thread screw spike is not allowed with bumps and burr
free running thread gauge, influence the use of double cusp,
scratches and incomplete thread is not allowed.
5.3The lower thread tooth shaped screw spike should be neat,
threaded integrity, splitting traces is not allowed.
5.4The spiral spike surface are not allowed to affect the use of
the dent, burr, flash, burn and oxide skin.
6.Should be real spiral spike tension test, when the load is 130kN,
no broken screw spike.
steel zinc platingscrew spikes
carbon Steel, alloySteel
black,galvanized,dacromet, alloy permeability,etc.
Deliver,Shipping and Service
Packaging Details:woven bags or cartons or wooden case
Delivery Detail: according to your requirements,accept L/C or T/T payment
If you're going to wholesale the track part railway sleeper spike
made in China, welcome to consult the price list and the quotation
with us. We're one of the leading China manufacturers and
suppliers, welcome to buy the famous brands' products in stock at
cheap price from us.