Performance:
1. Design for off-grid wind power system.
2. Applicable to different kinds of batteries .
3. PWM stepless unload mode, which burn the excess power into
mosfet, making the battery charging in best status.
4. Digital intelligent control, With powerful imported MCU control
as the core device .To ensure Simple peripheral circuit structure,
And more flexible and powerful control method and control strategy.
5. Modular design with simple structure and easy maintenance.
6. LCD display function, visually display wind power , wind voltage
, wind current , wind turbine speed ,battery voltage , battery
power ,charge current.
7. Perfect protection function:Battery overcharge protection,
Battery over current protection,Battery reverse connection
protection, Open battery protection ,Wind turbine automatic brake
and manual brake, thus the system has higher reliability.
8. TVS Lightning Protection.
9. .Wind turbine output voltage intelligent boost:The boost module
starts automatically when the wind turbine voltage is lower than
battery voltage , ensure that the wind turbine normally charges the
battery.The boost module shuts off automatically when the wind
turbine voltage is higher than battery voltage.
High-voltage wind turbine intelligent buck: The buck module starts
automatically when the wind turbine voltage is higher than battery
voltage , The controller real-time tracks maximum power of wind
turbine and Real-time limits the winding current of wind turbine
.To solve the problem of overheating of wind turbine.With press key.User can choose the intelligent boost or intelligent
buck according to performance of wind turbine . To ensure the
system work more reliable andmore efficiently.
10 .Impedance matching self-adaption:Due to internal resistance of
wind turbine, battery, According to the impedance matching
principle, The wind turbine will have maximum power utilization
rate and maximum power output only when the input impedance equals
to output impedance, with impedance matching self-adaption .This
controller enhances energy efficiency.
11. Combine the wind turbine open circuit with dump load ,over
rotational speed, over voltage, over current limitation: When the
total current of wind and solar is higher than limit current point
or battery is full , The PWM duty cycle of controller will be
decreased untill battery is fully charged. And then controller
disconnects the charging loop, the wind turbine will be on no-load
operation. In order to prevent wind turbine from propeller racing
.This controller is designed with over-current and over-voltage
limit, Controller will automatically start PWM voltage intelligent
dump-load function once wind turbine rotation speed or wind turbine
voltage is more than setting point. So avoid wind turbine constant
working in dump-load status, and increase the controller service
life.
12. Maximum charging current limiting for battery: User can set the
battery capacity and maximum charge current according to systems’
exact configuration . To ensure the battery service life.
13. Wind turbine charging able or enable by manual:Turn on or turn off the charging switch by manual, The wind
charging is shut off if choose switch off, The wind charging is
normal if choose switch on . To avoid sparks when connection the
wind turbine to controller , User can choose switch off .
Optional Functions :1.Optional temperaturecompensation function.
2.Optional RS232/RS485/USB function to communicate with computer and
SD card stocks parameters automatically.
3.Optional DC Output Function.
Technical Parameters:
Item No. | TGW100-120 | TGW100-220 | TGW100-240 |
Rated Wind Power(W) | 10kW |
Maximum Wind Power ( W) | 15kW |
Rated Battery Voltage(V) | 120V | 220V | 240V |
Floating Voltage(V) | 140V | 252V | 280V |
Over Voltage Shutoff (V) | 144V | 259.2V | 288V |
Over Voltage Recovery( V) | 142V | 257.2V | 286V |
Control Mode | PWM |
Display Mode | LCD |
LCD Parameter | wind power , wind voltage , wind current , wind turbine speed
,battery voltage , battery power ,charge current |
Cooling | By fan |
Working Temperature | -20~+55℃(no condensing ) |
Working Humidity | 35-90%( RH ) no condensing |
Protection Type | Battery overcharge protection, Battery over current protection,Battery reverse connection protection,Open battery protection,Wind turbine automatic brake and manual brake, TVSLightning protection |