3 circuits(R/G/B) 20meters common anode 18A rgb led light strip
remote touched rgb controller 1. rgb led strip remote touched rgb controller
2.Support DC 12V
3.Max power 216W
5.Easy to use
1.Touching ON/OFF button,you can switch on/off the RGB strip.
2.Slide the color button can adjust the same color.
3.Increasing color button can adjust the current color to the most
vivid,dicreasing color button is contrary,until pure white.
4.You can adjust the brightness by dimming function,to brighten and
dim the light.
5.Gradual change mode:Touch on buttom again under monochrome mode
condition, RGB strip will be changed into gradual change mode
.Increasing color button will speed up the color change,decreasing
color button will slowdown.
6.Hopping mode:Under gradual change mode condition,touch on
button,the RGB strip will be changed into hoppingmode.Increasing
color button will speed up the hopping,decreasing color button will
7.Under Gradual change or hopping mode,touching on switch will
change one to the other.Close the RGB strip and restart it if you
want to enter monochrome mode.
Thanks for using led controller FUT-005N manufactured by Futlight.
One package includes:one controller,one remote control(without
one core-end terminal,one usage instruction.
Please contact your supplier if any problems occur before you use.
Please follow the instructions to use safely.
Attention! Operate Carefully! Please read the following tips
1, Donot install the product in areas with thundering,strong
magnetic and high pressures.
2, Make sure the connection is right and firmed in case of fire
accident caused by short circuit.
3,Please install the controller with ventilation to make sure the
temperature is appropriate.
4,Please check whether the input voltage,power supply(constant
acord with the requirements.
5,Please donnot connect the power before connection.
6,Please contact the supplier when problems occur.Don’t maintain by
7,The Instruction is for this Item Only,no notification if any
FUT-005N is a multifunction Touching RGB LED Controller. It adopts
the most advanced PWM reomte control
technology ,can control all the full color LED lighting with four
lines three circuits(common anode),with more than 640000
colors and 15 auto light changing modes.it widely applies
to RGB LED strip light,LED Module,etc
Technical Parameters(remote control)
1Power supply: AAA battery * 3pcs
3Fabrication processing: multicolour printing & UV varnish
1. Working voltage:DC12V/24V
2. Output control: 3 circuits(R/G/B)
3. Control current:6A/circuit
4. Connecting mathod: common anode
5. Wireless frequency:433.92MHz
6. Receiving range:20meters
Functions of Keys
1. Key 1: on/off
2. Key 2: light changing mode(15 modes)
3. Key 3:color light/white light switching mode
4. Key 4: turn up(brightness/speed)
5. Key 5: turn down(brightness/speed)
How to use
1. Press Key 1 to turn on/off in any state.
2. Press Key 2 to activate light changing mode, a new mode each
press,15 modes in total.
3. Press Key 3 once to activate white light mode, changing
brightness by pressing Key 4/Key 5. Press Key 3
to activate color light mode, changing brightness by pressing Key
4/Key 5 or changing light color by touching
4. Resume fuction. The previous settings will be resumed while
power on again
Press Key 4 once within 3 seconds when power on again,.the light
will blink 3 times if matching is successful.
Clearing Code Press Key 4 five times within 3 seconds when power on
again,.the light will blink 6 times
if clearing is successful.
Please don't touch or press the color ring while loading the
battaries to ptrotec the sensitiveness. Please use
the remote controller 3 seconds after the battaries are
loaded.Please reload the battaries when you find the
color ring is not sensitive.