Energy Saving Dimmable Led Lights Intelligent Controller
Simulate Sunset/sunrise led grow lights for plants 180W dimmable
dimmable LED Grow Light Flowering updated Apollo
Part I - Features:
dimmable LED Grow Light Flowering
1). Compare with traditional LED Grow Light, P4(60*3W) means a
revolutionary transformation. It is with dimmer and a more
intuitive display which allow a better visual effect when
operation. Brightness can be adjusted freely and provide certain
light intensity for different periods of plant.
2). P4(60*3W) can simulate Sunrise and Sunset to feed the plant
with certain light intensity, completely changes like the Sun. It'
more scientific and reasonable for plants' growth.
3). P4(60*3W) comes to modular, it is easy to disassemble and
maintain compare with traditional LED Grow lights.
4). P4(60*3W) with lens, which has a better focusing effect than
that of traditional ones and increase the light intensity.
5). Air aviation plug type is applied for power supply connection,
it's more convenient to be disassembled, higher grading and more
humanized design to compare with traditional fixed connection.
6). P4(60*3W) LED Grow light can replace triple to 5 times power of
HID light, save about 80% energy.
7). Suggested ratio are (Red 4X10PCCS, Blue 4X5PCS, R:B=2:1) and
(Red 4X9PCCS, Blue 4X6PCS, R:B=3:2).
8). Customized ration and spectrum can be produced. Red 620-630nm
& 640-660nm, Blue 450-460nm & 460-470nm is recommended to
apply. Red stimulate germination, flowering and fruiting while blue
promote leafing. Customized wavelength and ratio can be provided.
9). Built-in fans provide good heat-dissipation.
10). Built-in power supply, no need other device, directly plug
AC85V~264V. No need for ballast,reflector.
11). Ideal device for different stages of plant growth, work well
with indoor gardon, hydroponic plants and soil culture plants.
12). The lighting area and height will change to different plants
and environment, parameters will change as well.
13). All applied material meet the requirements of environmental
protection, no harmful substances as Mercury.
dimmable LED Grow Light Flowering
Part II - Diagram for Lux / Distance:
Diagram for Lux / Distance
Part III - Parameters:
Part IV - More Description:
1). a). As for the housing of P4(60*3W), there are white, black,
blue and red, golden colors for options.
b). The product include 60PCS of 3W LEDs which set in 4 modules
with 15PCS in each module.
c). The application of Aluminum substrate and extrusions heat sink
ensure normal heat-dissipation when reduces the lamp weight.
d).Each LED with a Zener Diode, to make sure that if one LED broken
, others will be not be affected.
e). When input voltage is AC110V, PF≥0.99; but PF≥0.94 if you input
2). Input voltage AC85-264V, User-friendly, safe and applicable for
3). Lifespan above 50,000 hours.
4). With 2 build-in fans, which help dissipate the heat inside the
housing effectively. And lower noise when applied correctly.
5). Applicable for plants’ growth, flowering and fruiting.
6). Different spectrum solution is available, red light stimulate
flowering and fruiting while blue one promote leafing. Customized
spectrum solution can be provided.
7). Safe, environment-friendly and no pollution & harmful
dimmable LED Grow Light
Part V - Cautions:
1). Make sure it's applied in right conditions.
2). It mustn't be touched or beat when working.
3). IP55 for the back of the product. But not waterproof for other
4). Above parameters is for the standard spectrum(Red 4*10PCS, Blue
4X5PCS, R:B=2:1) or (Red 4*9PCS, Blue 4X6PCS, R:B=3:2). Customized
spectrum can be made as well.
Part VI - Mannual for control pannel:
1). Plug in, then turn on the switch, there are two line segments
jumping, it means normal working.
2). There are 5 modes for the control pannel: E1, C1, C2, C3, C0,
among of which E1 simulate the Sun in 24hours' cycle shift. C1, C2,
C3 are mannual diming modes. C1 is general channel, C2 & C3 can
adjust single channel only. C0 is "save" mode.
3). Displaying area shows the percent of the brightness, it's from
0-99%; But it shows the hour segment of the light's working when
4). "+""-" key; it's 1% adjustment when single click while it's 10%
adjustment when long pressing.
5). Press "MENU", it displays C1, then press "+" or "-" key to
adjust the brightness; After adjusting the brightness of C1, C2
& C3 in turn, then press "MENU" to go back to C1 and then to C0
to save the setting.
Under E1 mode, if press "MENU" key then it displays hour segment (
From 00:00 to 23:00), you can set the hour segment by press "+" or
"-" key, after that press "MENU" to confirm, then the light will
work from a new time.