50Hz 550W Stainless Steel Commercial Juice Extractor For Drink
Stainless Steel Main Parts
230V 50HZ / 110V 60Hz / 3700W
1)The juicer’s crust system is made of aluminum alloy and was created
by advanced technology. The
internal conformation is compact and reasonable. They are all made of
stainless steel where get in touch
with food .
2)The advantage of this production: It can resist decay, not easy
to rust and easy to clean. Turning on this
machine for several seconds you can get the fresh tasty and
delicious syrup .At present it is a satisfying
machine for hotel, restaurant and drink shop .All kinds of fresh
melon fruit and vegetable can be squeezed .
For example: watermelon, cantaloupe, apple, pear, orange, peach,
almond, pineapple, grape, carrot,celery
and so on .The residue will be separated voluntarily from the
syrup. The handle of residue is convenience.
3)The rate of juice gets to 75%. Because the operation is
convenience and easy, as soon you use the
juicer as you can get the fresh and original syrup and you can choose the
fruit and vegetable freely .The
syrup is healthy nature and secure .It is the necessary way for the drink’s
drink shops, fruit shop, restaurants, hotels, bars, card rooms, tea
show, cafe, etc.
KX-A6000 Professional new stainless steel juicer extractor /
apple juice extractor
Stainless Steel Body
3.Machine Packing size :
230V 50HZ 550W
7. Volume :
Super wide feed opening can hold a whole apple with quick speed and
Powerful horsepower motor could produce 84% percent syrup at a
Special safely and convenient handle switch
Streamline project plastic body with five star qualities
Orange juicer before operation
A. Power supply of 110v-240v The power supply must have the safety
system to connect with the ground.
Please don’t replace the machine’s cable by yourself.
B. Check the lid whether lock closely with the bower centering (You
can pull the spigot of juice for cask that
made of stainless steel if it not move, it’s correct .If it is lax
you can readjust the lock pin
C.Connect to the power supply and turn on the machine, examine the
machine with your eyes and ears to
make sure the function normal before normal work.
Orange juicer procedure for operation
1)Please clean the fruit or vegetable you want to squeeze before
squeeze and peel off the husk.(For
example:orange,watermelon).Some fruit like peach and apricot they have the
firm pip you must take out
them or it will shatter machine .
2)Cutting the pulp into piece or block smaller than the size of the
ostium for putting the pulp.
Then put them into clean container.When turn on the machine you can
put the pulp into ostium continuously
or use the fruit pusher, then the fresh juice will pour from the
3) If you want to change fruit or vegetable the machine worked in normally, infusing clean water into ostium it
will be cleaned and the peculiar smell will be resisted.
Orange juicer after operation
If you want to clean or change the blade and centrifugation basket
after you use the machine over.You must
turn off the power then you can open the lid and screw the nut,
take out the blade, centrifugation basket to
clean completely (Don’t move the other parts lest should effect the
quality for boot-strap). Finally install the
parts with reversed sequence. Putting on the lid then the machine
can work normally again.
1.double-layer filter screen
2.double grinding cutter
3.High-end stainless steel
4.Heavy-duty 800 watt motor