TZ-FJ--B Fully Auto Rewinding and Perforating Toilet Paper Machine
Adopts advanced PLC technology, variable speed adjustment,
electronic braking, and touch button multimenu type LCD screen
operation control panel.
We independently developed long-distance communication service
system. It can detect the machine running at any time.
The machine is newly added coreless roller shaped rewinding system.
It adopts PLC wind pipe-shaped new technology. It's no need to put
core or stainless steel pipe. It's full upgrade the whole machine.
1. Automatic core loading and replacing. The logs are automatically
pushed out after finishing winding, and then start winding again.
The cores can be adjusted to any size of cores within one minute.
2. After finishing winding the roller pushed out automatically. It
adopts mechanism arm pusher to push the roller out. The minimum
diameter of finished roll is 60mm.
3. Automatic trimming, gluing and sealing: It has replaced the
traditional sealing of rolls with the international popular
trimming and sealing, which can have 10-18mm tails to facilitate to
start pulling out the paper. At the same time, it can greatly cut
down the wastage of the paper, thus to cut down the production
4. Advanced PLC programmable control technology: The winding
profiles can be tight at the beginning of winding, and then getting
loose, to avoid the problems that the cores are loose from the
rolls after long time storage.
5. Automatic detection of paper break and paper wrap up: To
guarantee the high quality of the finished rolls even in the high
6. Coreless rewinding system has changed the traditional method to
take out the core to make high quality solid coreless roller.
Reducing the manpower.
7. With high precision screwy perforation knife. With 4 perforation
blades to make clear perforating. The perforating pitch controlled
by gear box.
8. Three back-stands, pneumatic jumbo roll loading, and
pneumatically wide belt paper unwinding, driving, and individual
web tension control unit for each jumbo roll.
9. Point to point embossing unit: The paper are embossed on both
sides and feel softer. It makes embossing much more clearer and
better. The finished rolls compared to the same diameter rolls with
10. The web can be threaded on the machine by the two jog buttons,
It's more safety and easier to feed the web
|Parent Roll Width (mm)||1330||1750||1950||2150||2350||2550||2750|
|Parent Roll Diameter (mm)||Î¦ 1100|
|Finished Roll Diameter (mm)||Î¦ 60~150 ( Tightness adjustable)|
|Finished Roll Core Diameter (mm)||Î¦ 32~50 mm|
|Parent Roll Core Diameter||3 /76.2 mm|
|Perforation Pitch(mm)||110mmor 100mm|
|Parameter Setting||HMI (LCD Screen operation panel)|
|Programming Controller||PLC ( MITSUBSHI )|
|Braking||Electronical and air pressure control |
|Finished Products Sheets Control||Increase gradually till reach the set diameter|
|Dimension(L— W— H)mm||6200 x (1600~3300)x1850|
|Embossing||One set of steel to rubber embossing rollers (optional)|
|Unwinding Stands||2, for two Parent Rolls|
|Finished Roll Rewinding||With core or coreless rewinding system (optional)|