0.12mm-0.3mm high-intensity prepainted Steel Coil
Prepainted Steel Coil is produced by coating a layer of paint on
the surface of galvanized or galvalume coils, Aesthetic appeal and
durability are the key features of color coated steel coil. A wide
slection of color is available to the customer and paint designed
to meet specific end use could be specified. Our pre-painted coils
are suitable for direct interior as well as exterior application,
sandwich panels and so on.
|Material||DX51D, CGCC, CGCH, CGLCC, CGLCH|
|Size Range||Thickness 0.12mm-0.3mm width 700-1250mm|
|Temper||Full hard, half hard, soft|
|Paint||Top side 17-25um, back side 5-10um|
|Color||According to Ral color card or sample|
|Impact(Shock Force J)||GB/T1732||9J|
|MEK Scrub Resistance||MCCA11-18||>100|
|Salt Spray Resistance||GB/T10125||500hr|
Each bare coil to be securely tied with two bands through the eye
of coil (or not) and one circumferential, the contact points of
these bands on the coil edge to be protect with edge protectors.
Coil then to be properly wrapped with water proof /resistant paper,
it then to be properly and completely metal wrapped. And each
packed coil to be properly wrapped with band, three-six such band
through the eye of coil at about equal distance, and two-four such
bands securely tied around belly of coil at about equal distance.
a. 30% prepayment and 70% against B/L copy.
b. L/C at sight (need check the bank information and account
Within 15-30 days after prepayment under normal conditions.
We will inform you when signing contract if delivery time delay
Contacts: Mrs. Betty
Mobile/Viber/Whatsapp: +86 18012353378