Tumbling Barrel Shot Blasting Machine for Small Metal Casting Parts
Tumbling Barrel Shot Blasting Machine Description
Rubber Belt blasting machines are equipped with a perforated rubber
belt over which slide work pieces, while thoroughly cleaned.
Version with a rubber belt is used to prevent breakage and other
damage of sensitive work pieces. The abrasive flows through the
holes in the belt into a collecting hopper and is poured into a
storage bunker via the abrasive cleaner by means of an elevator.
The newly developed abrasive separators ensure that the abrasive
receives optimum cleaning and a high cleaning speed can be
achieved. Innovative pressure washers provide optimum sand blasting
work pieces and maintain a high productivity process.
Structure of Tumbling Barrel Shot Blasting Machine
|Items||The main parts|
|Blasting Chamber||Chamber cover, liners, end plate, manual door, etc|
|Blasting Wheel||Blasting Wheel, Motor, Pulley, Triangle Belt, Base Plate, Etc|
|Elevator System||Cover, Elevator Belt Assembly, Pulley, Drive, Tight Device, Etc|
|Separator System||Separator, Shot Bucket, Etc|
|Screw conveyor||Screw shaft, blades, bearing base, etc|
|Belt System||Rubber belt, drive shaft and driven shaft, tight shaft, drive
|Pneumatic System For Shot||Shot gate, cylinder, shot- slip pipe, air processor, etc|
|Electronic Control System||Control cabinet (conventional electronic control), the second line,
|Dust Collector System|
Bag type dust collector , sedimentation tank, piping, blower, etc
Tumbling Barrel Shot Blasting Machine Advantage
1. Used for surface cleaning, rust removing and surface
intensification of various middle and small size casting, forging
2. Suitable for different production scale and can also be used in
conjunction with the continuous conveyor components to form the
production of clean-up lines.
3. Advanced design, reasonable structure
4. Little energy consumption and high efficiency.
5. This machine adopted the double plate impeller head,
characterized as brief structure, easy to change impeller and high
shot blast efficiency.
6. Efficient separator of shot from sand, high separating quality
and productivity, long impeller lifetime.
7. The bag dust filter can greatly reduce air pollution and improve
the work environment, complying with state emission standard.
8. Abrasion resistant rubber tumble belt, reducing noise and
collision of work pieces.
9. Automatic discharging of materials after cleaning of work
pieces, low labor cost.
1. Reducer drives the loading crane to load the work-piece hopper
and sends the work-pieces into the cleaning room.
2. The shots come out from abrasive impeller and blast on the
3. The shots and waste sands goes into the hoister and be sent to
the splitter for separating.
4. The splitted clean shots collected by shot circulating device
and go into the abrasive impeller for shotting work.
5. The waste sands goes out from waste pipe.
6. The dust sucked by blower and be sent to dust catcher, filtering
clean air out and the dust to the dust collecting box which needed
to be cleaned regularly.
Notice and Maintenence
1. Regularly cleaning the collect box of the dust collector to
protect the dust removing pipe from blacking.
2. Cleaning the bottom of the blasting room and the separator
3. Often cleaning the shots around to avoid slipping and falling.
4. Regularly check the rubber belt and belt of the elevator to
5. Never to open the workpiece feeding door unless the machine stop
completely to avoid accident.
6. Frequently check the end plate of the blasting chamber and the
wearable parts of the blasting wheel. To change the badly worn
parts in time.
7. The machine must be lubricated periodical to guarantee flexible
8. regularly check and clean the drive section of the machine,
change the badly worn parts.
1. Reply your inquiry in 24 hours.
2. Experienced staffs answer all your questions in time.
3. Customized design is available.
4. Exclusive and unique solution can be provided to our customer by
our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our
6. Professional factory: We are manufacturer, specializing in
producing all kinds of Shot Blasting Machine & Molding Machine
& Core Shooting Machine for more than 40 years, competitive
with good quality.
7. As an honest seller, we always use superior raw material,
advanced machines, skilled technicians to ensure our products to be
finished in high quality and stable feature.