Stainless Steel Optic Fiber Outdoor Wire Anchor And Span Clamp For
Droping Telecommunication Cable High Corrosion
1. The body is made of stainless steel with hot-dip Zinc Plating,flame
2. for managing the fiber optic cables
3. Effective and time saving for cabling.
4. ISO 9001:2008 Certified
5. For good resistance to corrosion in out plant application
6. For more hooks and clamps types to match up.
7. Fo drop wire Hanging accessories,firmly .
The set of span clamp and outdoor wire anchor are needed to drop
telecommunication cable into a customer’s home. If a span clamp
should come apart from a messenger wire or a self-supporting type
of telecommunication cable, or if an outdoor wire anchor should
come apart from the span clamp, the drop line will hang loose,
which will create a facility fault. It is therefore necessary to
prevent such accidents by ensuring that these components do not
separate from the equipment.
The stainless steel shall be less readily sensitized with respect
to inter-granular corrosion especially during fabrication.The
process of coating is carried out after the clamp has been formed
into shape and with the holes already punched or sheared-off so
that the edges are also coated.The coating is adherent so that it
will not be removed by any reasonable process of handling or
installation.The finished product is free from sharp edges,
uncoated areas, blisters, dross inclusions and other type of
projections that would interfere with its intended use.
The separation of a span clamp or outdoor wire anchor can be caused
by (1) loosening of the nut on the span clamp, (2) incorrect
placement of the separation-prevention washer , or (3) corrosion
and subsequent deterioration of an iron fitting. Conditions (1) and
(2) can be prevented by properly installing the components, but
deterioration caused by corrosion (3) cannot be prevented by proper
installation work alone.
STAINLESS STEEL 304 is IMPORTANT to Condition (3)
SPAN CLAMP/Draw HOOK/ HANGING CLAMP
Installation Position is VERY IMPORTANT
The above Span clamp and outdoor wire anchor is mainly used outside
for out plant wire hanging supports,we also offer more accessories
for Indoor wire cable cabling on wall,on dest,in corner and so on.
The FTTH Installation Accessories Set concludes:junction box,fiber wall
socket(also named Single family unit rosette,SFU rosette),draw
hooks,cable clamp,cable wall bushings,cable glands,cable clips,tail
duct,cable wiring duct,nail clip.
Cable bushings were originally designed for indoor use on sheet
rock.Cable bushings are plastic grommets inserted into a wall to
provide a clean appearance for coax cable,fiber optic cable and all
cable entry. Cable bushings are a low cost and fast alternative to
installing traditional wall plates.They protect the cable from
sharp edges when in applications. We offer different shape and size cable wall bushings,wall
tubes,fiber inside corner,fiber outside corner,flat elbow,raceway
duct fitting,raceway molding,bend radius,tail duct,cable
clamp,wiring duct.All used for fiber optic cabling and other wire
Fiber Optic Exterior Slack Storage W/O Holes hidden and
organized.Slack storage box is used for exterior slack storage
applications using single fiber cable. There are two stackable
storage spools that allow storage of multiple single fiber cable
drops. Both of these spools are removable. In an instance where
only one spool is sufficient, the spool can either be secured at a
lower level or can be mounted at an elevation onto the risers off
the back of the inside of the box as a spool on the upper level.
This allows additional storage under the spool.
Fiber Inside Corner, Inside corner for the self adhesive single
Fiber Flat Elbow, Flat elbow for the self adhesive single fiber
Fiber Outside Corner,Outside corners for the self adhesive single
Self Adhesive Single Fiber Molding
Cable drawing hooks are made of metal stainless steel in accordance with ASTM A307.hanging hardware, hard material,with splint type and C type for
option.The conduit box,pipe joint box single gang or double gang
are made of PC material,fire restardant.
Span Clamp is attached to the messenger wire at mid span to hold
the p-clamps with dropwires
Telecommunications subscriber loop
Fiber to the home (FTTH)