Horse Stall in Galvanized Hot dip galvanized or powder coated horse
Horses groomed regularly have healthier and more attractive coats.
Many horse management handbooks recommend grooming a horse daily,
though for the average modern horse owner, this is not always
possible. However, a horse should always be groomed before being
ridden to avoid chafing and rubbing of dirt and other material,
which can cause sores on the animal and also grind dirt into horse
tack. Grooming also allows the horse handler to check for injuries
and is a good way to gain the trust of the animal.
Proper basic grooming of a horse is a multi-step process involving
several simple tools:
①Curry, curry comb, or currycomb: Usually a round tool with short
teeth made of plastic or stiff rubber, used to loosen dirt, hair,
and other detritus, plus stimulate the skin to produce natural
②Dandy brush: A stiff-bristled, "dandy" brush is used to remove the
dirt, hair and other material stirred up by the curry. The best
quality dandy brushes are made of stiff natural bristles such as
rice stems; plastic-bristled dandy brushes are more common.
③Body brush: A soft-bristled "body" brush removes finer particles
and dust. Some natural body brushes are made of boar bristles, like
human hairbrushes, others are made of soft synthetic fibers.
④Grooming rag or towel: A terrycloth towel or other type of cloth.
Sometimes called a "stable rubber."
⑤Mane brush or comb: Horses with short, pulled manes have their
manes combed with a wide-toothed plastic or metal comb. Horse tails
and long manes many be finger-combed or are brushed with either a
dandy brush, body brush, or a suitable human hairbrush.
⑥Hoof pick: All four feet of the horse need to be cleaned out and
inspected for signs of injury or infection. See "Hoof care and
⑦In special weather conditions, a metal shedding blade with short,
dull teeth is used to remove loose winter hair. Metal grooming
tools used on sheep and show cattle may also be too harsh to use on
⑧In the summer, fly spray is often applied to the horse after
⑨Sweat or Water Scraper: A metal or plastic tool to remove excess
liquid from a horse's coat.
⑩Sometimes, though not always, horses are clipped with scissors or,
preferably, electric clippers. The most common areas are a short
"bridle path" just behind the ears, where a few inches of mane is
removed to help the bridle lay more neatly; and the fetlocks, where
extra hair can collect undesired amounts of mud and dirt. For horse
show and exhibition purposes, additional clipping may be done.
The product details:
|Name||Horse Stall in Galvanized Hot dip galvanized or powder coated horse
|Front Type||Swing, Sliding, Fancy, European, or customized|
Length: 8ft, 10ft, 12ft, 14ft (2.5m - 4.0m)
Height: 1.5m, 2.0m, 2.2m.
Or, any other sizes you like
Frame tube 50*50mm RHS, and 102/114mm Round Post in middle door
heavery duty U channel to take T&G boards
Top grill tube in OD25mm round tube
|Finish||Powder Coated Finish or Hot Dip Galvanized Finish|
in bamboo wood, 20mm, 25mm, 28mm, 32mm, 38mm.
very strong, durable click, no cracking by water
(a.) brass lock latch
(b.) heavy duty stainless steel hinge, no rusting warranty.
(c.) golden top ball or flat cap by your choice.
(d.) swivel feeder system (optional)
(e.) swing feeder window (optional)
(1.) Full welds will make sure the stalls are strong and durable.
(2.) No sharp edges promise the people and horse safe.
(3.) Yoke door allows horses place his head outside.
(4.) Powder Coated Finish: We can PC any color you like. Say, Black
Color, Blue Color, Hunter Green color, etc.
(5.) Assembly easily: use heavy duty bolts or different way
connector to connect together.
(6.) More style stable are available, sliding front, and swing
door, open door etc...