Home > Electronic Data Systems >

ACS712ELCTR-05B-T Electronic IC Chip Current Sensor 5A 1 Channel Hall Effect , Open Loop Bidirectional

Categories Electronic IC Chip
Model Number: ACS712ELCTR-05B-T
Place of Origin: Original
Brand Name: Original Manufacturer
Certification: Rosh
MOQ: 1
Price: Negotiation
Packaging Details: Original Packing
Delivery Time: In stock
Payment Terms: TT, Paypal, Western Union And So On
Supply Ability: 80000
For Measuring: AC/DC
Sensor Type: Hall Effect, Open Loop
Current - Sensing: 5A
Number of Channels: 1
Output: Ratiometric, Voltage
Sensitivity: 185mV/A
Frequency: DC ~ 80kHz
Linearity: ±1.5%
  • Product Details
  • Company Profile

ACS712ELCTR-05B-T Electronic IC Chip Current Sensor 5A 1 Channel Hall Effect , Open Loop Bidirectional


ACS712ELCTR-05B-T Electronic IC Chip Current Sensor 5A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3


For MeasuringAC/DC
Sensor TypeHall Effect, Open Loop
Current - Sensing5A
Number of Channels1
OutputRatiometric, Voltage
Sensitivity185mV/A
FrequencyDC ~ 80kHz
Linearity±1.5%
Accuracy±1.5%
Voltage - Supply5V
Response Time5µs
Current - Supply (Max)13mA
Operating Temperature-40°C ~ 85°C
PolarizationBidirectional
Mounting TypeSurface Mount
Package / Case8-SOIC (0.154", 3.90mm Width)

Features and Benefits

▪ Low-noise analog signal path

▪ Device bandwidth is set via the new FILTER pin

▪ 5 µs output rise time in response to step input current

▪ 80 kHz bandwidth

▪ Total output error 1.5% at TA= 25°C

▪ Small footprint, low-profile SOIC8 package

▪ 1.2 mΩ internal conductor resistance

▪ 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8

▪ 5.0 V, single supply operation

▪ 66 to 185 mV/A output sensitivity

▪ Output voltage proportional to AC or DC currents

▪ Factory-trimmed for accuracy

▪ Extremely stable output offset voltage

▪ Nearly zero magnetic hysteresis

▪ Ratiometric output from supply voltage


Description

The Allegro™ ACS712 provides economical and precise solutions forAC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch- mode power supplies, and overcurrent fault protection. The device is not intended for automotive applications.

The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction pathgeneratesamagnetic field which the Hall ICconverts intoa proportionalvoltage. Device accuracyisoptimizedthroughthe close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.

The output of the device has a positive slope (>VIOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sampling. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival ofContinued on the next page…


Selection Guide

Part NumberPacking*TA (°C)Optimized Range, IP (A)Sensitivity, Sens (Typ) (mV/A)
ACS712ELCTR-05B-TTape and reel, 3000 pieces/reel–40 to 85±5185
ACS712ELCTR-20A-TTape and reel, 3000 pieces/reel–40 to 85±20100
ACS712ELCTR-30A-TTape and reel, 3000 pieces/reel–40 to 85±3066

*Contact Allegro for additional packing options.


Absolute Maximum Ratings

CharacteristicSymbolNotesRatingUnits
Supply VoltageVCC8V
Reverse Supply VoltageVRCC–0.1V
Output VoltageVIOUT8V
Reverse Output VoltageVRIOUT–0.1V
Output Current SourceIIOUT(Source)3mA
Output Current SinkIIOUT(Sink)10mA
Overcurrent Transient ToleranceIP1 pulse, 100 ms100A
Nominal Operating Ambient TemperatureTARange E–40 to 85ºC
Maximum Junction TemperatureTJ(max)165ºC
Storage TemperatureTstg–65 to 170ºC

Cheap ACS712ELCTR-05B-T Electronic IC Chip Current Sensor 5A 1 Channel Hall Effect , Open Loop Bidirectional for sale
Send your message to this supplier
 
From:
To: Shenzhen Goldensun Electronics Technology Limited
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly