Computer-control This UTM are suitable for the testing of tensile,
compression, shearing force, adhesion, peeling force, tear
strength, fatigue etc for semi-product & finished product in
the field of rubber, plastic, metal, nylon, non-woven fabrics,
textile, tape, polyfoam, waterproof material, electric wire,
electric cable, etc., which are the basic facilities for input
quality control(I.Q.C), Quality Control(Q.C.), Physical inspection,
Mechanics research and material development.
Can achieve the closed loop control in force value, speed &
displacement, so can satisfy the fatigue test of rubber and durable
test of other material in the condition of low cycle.
Can record and memorize the whole testing data.
This universal testing machine adopts two strong supports, precise
load cell to measure the load. Its crosshead can move up or down at
a constant speed.
This universal testing machine can program the crosshead speed or
conduct cyclical testing, allow testing at a constant force,
testing at constant deformation, testing at constant displacement,
This testing machine can equip with extensometers to measure the
extension or deformation.
According to test requirement for temperature, humidity, pressure,
etc, special device, such as environmental chamber can be placed
around the test specimen to do test in certain temperature,
humidity or pressure.
Matched with various test fixture, like peal, puncture, tear,
pneumatic grip, belt tension, etc. This UTM can be used to metal,
non-metal, composite materials like rubber, steel wire, plastic,
seat belt, textile character test.
Protecting functions of over load, over current, over voltage,
crosshead limit moving space protection, auto stop at break.
3. software introduction
- Easy to control and friendly interface
windows based interface, easy and fast to reach different
functions, suitable for most of operators using habits. Integrated
all common operation functions, like specimen information input,
specimen choosing, curve plotting, data display, data process, data
analysis, test operation etc., easy and convenient to operate.
- Full digital display and computer control
Adopting remote controller, fast response and reliable to parameter
gathering. Realize digital adjustment and zeroing of load,
deformation and displacement as well as PID parameter adjusting.
- Different control mode & speed setting
- Programmable control mode
Users can program test mode according to their own requirements.
- Load holding facility for a specific period:
Report is editable
|Grade||Grade 1(Grade 0.5)|
|Deformation measuring range||2%~100%FS|
|Relative error of deformation value||+/-1%(+/-0.5%|
|Force speed||0.01-50 kN/s|
|Displacement speed||0.01-500mm/min (can be 1000mm/min)||0.01-300mm/min||0.01-250mm/min|
|Tensile fixture for round and flat specimen||Standard one set tensile fixture for round specimen, one set
tensile fixture for round specimen, one set of compression platen,
other test fixture can be equipped according to client’s
requirement or relative test method|
|Extensometer||According to test materials or client’s requirement|
|High and low temperature test||According to relative test method or client’s requirement|
|Max. stroke of crossbeam||1090mm||1070mm||1140mm||1200mm|
|Effective tensile space (equip with metal tensile fixture)||800mm||700mm||600mm||600mm|
|Distance between columns||430mm||550mm||600mm||625mm|
|Dim. Of loading frame(cm)||79x43x186||92x50x198||110x60x241||130x87x250|