China Sinotruk Howo Heavy Duty 20 M3 Water Tank Truck 6x4 For Sale
The product is reasonable in design and beautiful in appearance. It
is equipped with a special duckbill spraying device for frontage,
which can effectively flush the road surface. The sprinkling water
is a special post-sprinkling device, which improves the effect of
sprinkling and dust-reducing. The design can be equipped with a
three-bend spray gun for road stones. Hard objects such as sand can
effectively rush to the roadside; high-pressure water guns have
strong power and long range, up to 30 meters. Standard self-flow
port, pressure drain, self-priming and other functions. The car is
widely used in gardens, sanitation, municipal, highway, sanitation
and other departments and institutions, schools, factories and
mines and other large and medium-sized enterprises and
Advantages and highlights:
one. The heavy-duty steam engine chassis adopts a new series design,
the vehicle layout is coordinated and reasonable, the cab is
luxurious and bright, safe and comfortable, the interior is
luxurious and atmospheric, the sealing is excellent, the front
glass and side window glass have wide vision, good lighting,
beautiful appearance and ride. Comfortable, fully reflecting the
development trend of medium-sized cars. The main performance
indicators of the chassis are technically advanced among similar
The pump uses a special sprinkler pump with the following features:
1. The input shaft obtains the required speed of the pump through
the speed increase box, and the pump is small in size and light in
2. It is a self-priming centrifugal pump with strong self-priming
3. The structure is simple, the operation is reliable, the
maintenance is easy, and the efficiency is high.
4. The impeller adopts double sealing ring and flat cross hole
structure, which reduces axial force and improves bearing life.
5. The shaft seal is mechanically sealed.
two. Tank assembly: The tank body is welded by high quality steel
plate. The tank body has an elliptical cross section, and the tank
head is made of advanced rotary machine. The tank body is
automatically welded by 9 meters, the weld seam is uniform,
reliable and firm, and the appearance is beautiful. The can body is
fixed to the car girders by "U" bolts through the legs. After the
tank is pickled and phosphated, the interior is coated with
anti-corrosive materials, and the exterior is sprayed with
polyester paint, which has strong resistance to oxidation and
corrosion. The liquid tank is firm and sealed, the sealing
structure is reasonable, the service life is long, corrosion
resistance, no deformation, and good sealing performance, and the
liquid in the tank does not flow out.
three. Advanced operating system: the front spray, two-way side spray,
and the rear sprinkle function can be operated in the cab. The
existing air pressure source of the car is used to operate the ball
valve through the solenoid valve to realize the switch of the valve
for different operations and meet the environmental protection
requirements. And high-quality aluminum ball valves are installed
at each water discharge port to ensure the reliability of the
four. Waterway system: mainly consists of water pump, front spray, rear
spray, two-way side spray (both pneumatic control), high pressure
water gun, self-flow port, high pressure water discharge,
self-priming function device, etc., each tube passes through steel
pipe or high pressure hose and each The switch valves are connected
in one piece.
Pump:Water sprinkling truck dedicated pump,
65QSB-50/110,output 50cbm/h.pump lift 110m.
High-pressure water gun shoot,gun range 35m
Sprinkling scope:14-18 m
|Weight in kg||Kerb weight (Kg)||12790|
|Gross vehicle weight (Kg)||25000|
|Wheel base (mm)||4600+1350|
|Performance||Maximum driving speed (km/h)||92|
|Fuel consumption (1/100 km)||38|
|Cab||Model||SINOTRUK HW76 Lengthen cab|
|single bunk,new type seat,adjustable steering wheel,EURO new type
heating & ventilating system,German VDO instruments,safety
belts, exterior sun visor,stereo radio/cassette recorder,left
|Type||6-cylinder in line, 4-stroke, water-cooled, turbo-charged &
inter-cooled, direct injection.|
|Maximum output Kw/r/min||247/2200|
|Maximum torque N.m/r/min||1350/1300-1600|
|Bore x Stroke||126x130mm|
|Make SINOTRUCK (CNHTC), Euro II emission standard, Thermostat with
80℃ opening begin, Rigid fan|
|Transmission||SINOTRUK HW19710 transmission ,10 forward and 2 reverse|
|Clutch||SINOTRUK Φ430 diaphragm-spring clutch,hydraulically operating with
|Steering||ZF8198 Steering Gear Box ,hydraulic steering with power
assistance.(Left hand driving)|
|Front Axle||SINOTRUK HF7 Front Axle,new 7-ton front axles of equipped with drum
SINOTRUK ST16 Double Reduction Drive Axle, Pressed axle housing,
central single reduction with planetary wheel reduction and with
differential locks between wheels and axles,ratio:4.42;strengthened
loading capacity and reliability have been increased greatly.
Service brake:dual circuit compressed air brake
Parking brake (emergency brake):spring energy,compressed air
operating on rear wheels
|Wheels & Tyres||Rims:10 hole-steel ;Tyres:12R22.5 tubeless tyre with 1 Spare tire..|
Operating voltage:24V,negative grounded
Batteries:2x12 V,165 Ah
horn,headlamps,fog lights,brake lights,indicators and reverse
SINOTRUK is located in Jinan city and was founed in 1956.It once
manufactured china’s first heavy duty truck.In 1960,sinotruk
introduced the steyr technology using on engine and axle from
Austria.Later,sinotruk established cooperation with German man
group and wobaco company.Today,sinotruk has developed into china’s
largest heavy duty truck manufacturing base and made significant
contributions to the development of china’s heavy duty truck
industry and national economic growth.Jinan Quanyu Import and
Export Co., Ltd. is one of the main exporters of Chinese trucks
which is authorized by Ministry of Commerce, and our company belong
to SINOTRUK sales department and we have specialized in sinotruk
trucks and spare parts for many years.The famous brand of sinotruk
are HOWO series,HOWO A7 series,HOHAN series.We can supply tractor
truck,dump truck,cargo truck,concrete mixer truck,fire tanker
truck,water truck,fuel tank truck,bulk cement truck,sewage suction
truck and also different types of semi trailers.
We have not only the certificate and license of truck export and
also strict quality management, fast and convenient channel of
goods delivery, strict examination in quality and quantity of
products, professional packing, professional and reliable loading
goods, on-time delivery and competitive prices. If you want to buy
these products, please contact us.
We sincerely hope to cooperate with you to expand market in your
1. By courier, like DHL, UPS FEDEX, etc. It is door to door,
usually, 5-7 days to arrive.
2. By air to the air port, usually, 3-4 days to arrive.
3. By sea to sea port, usually 15-30 days to arrive.
If your delivery time is very urgent, we suggest you choose by courier or by air.
If it is not very urgent, we will suggest you choose by sea, it is
Q1: How about the quality of the products?
A : We produce every product with good quality materials, and test
carefully to make sure stable good quality before shipment. So
please do not worry for it, as we wanna long-term business
cooperation with customers.
Q2: Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q3: What is the lead time ?
A: Small qty order needs 3-5 working days, big qty order usually
needs 10-15 working days depends on the order qty.
Q4: Can you offer other professional products?
A: Yes, we can order all kinds of heavy card filter core and water
I believe, if you work with us, you will be satisfy with our
quality delivery time and service.
Hope we will cooperate and keep friendly for a long time.
If you have any questions, pls feel free to contact us.