Insulation Oil/ Lubricant Oil /Fuel Oil Clarification Oil Separator
The fuel oil supply system is mainly used to improve the quality of
heavy fuel oil and then supply to the fuel machine. The system is
composed of oil supply pump, backwash filter, booster pump, heater
and other related equipment. The design is reasonable, compact and
easy to operate and maintain.
The fuel is filtered from the primary filter then filtered through
the backwash filter, flows to the mixing drum by means of oil
supply pump, pressurized by the booster pump then flows to heater.
and the temperature and viscosity of the fuel are controlled by
heating to achieve the oil inlet condition, thus improve the use
life of fuel machine.
And then, the neutral hole of the disk piece being the interface,
the liquid with higher density (heavy phase) will move outward the
neutral hole along the disk piece, flowing to the large centripetal
pump. The heavy residues will be accumulated in the sediment area,
waiting for discharge out of machine.
The liquid with lower density (light phase) will move inward and
upward along the disk piece wall and gather in the small
centripetal pump. The heavy phase and light phase are outputted by
the large centripetal pump and small centripetal pump respectively.
The marine separator is mainly used for cleaning up the moisture
and mechanical impurity in the fuel ( Light diesel oil, heavy diesel oil, fuel oil) and lubricating oil of ships and diesel engine
Product competitive advantage:
1, There are stationary centripetal pumps for heavy phase and light
phase output. Separated heavy phase and light phase are outputted
respectively by the large and small centripetal pumps which on the
top of the drum.
2, This series of separator outfits various specific gravity rings
with different diameter, which can be selected and used according
to the density and volume of the materials.
It has backpressure regulating valve. Separating effect can be
regulated by regulating backpressure.
Diesel Machine Power (Ps/Kw)
3000Ps-4000Ps / 2200Kw-3000Kw
Oil supply pump 1.2 / Booster pump 2
Introduction of Company:
Juneng Group employs a team of well-trained professional, adopts
advance EPR production management model in cooperation with
state–of–the–art apparatus and process i.e. CNC Turner, Machine
Center, Highly Accuracy Test Instrumentation, Quality and Process
Control System to ensure quality, stability, and reliability of
* Training how to instal the machine, training how to use the
* Engineers available to service machinery overseas.
* Repair and maintain
Market Around the World
Selling well in all cities and provinces around China, our products
are also exported to clients in such countries and regions as
USA,German, Korea,Japan, Pakistan, Malaysia, Singapore, Vietnam and