E2000 Fiber Optic Connector Single Mode High Precision For Fiber
Fiber Optic Connector is an important components used in the fiber optic network. It is also the key part used in fiber optic patch cord and fiber optic pigtail.
E2000 optical fiber connector, 1.25mm ferrule, snap-in mechanism,
available in single mode and multimode.
Externally a E2000 connector looks like a miniature SC connector.
The connector is easy to install, with a push-pull latching
mechanism which clicks when fully inserted.
It features a spring-loaded shutter which fully protects the
ferrule from dust and scratches. The shutter closes automatically
when the connector is disengaged, locking out impurities which
could later lead to network failure, and locking in potentially
harmful laser beams. When it is plugged into the adapter the
shutter opens automatically.
FOC COMMUNICATION CO., LTD provide a full range of fiber optic
connectors, such as SC, SC/APC, LC, LC/APC, FC, FC/APC, ST,
MU,MT-RJ, MPO, E2000 and DIN in SX and DX, various boot colors,
short boots and angled boot are available. Our products are
designed and controlled under IEC standard, meet the requirement of
Telcordia GR-326 and TIA/EIA as well.
The ferrule is protected by the integrated spring-loaded shutter.
The connector housing protects the ferrule all round against dust,
dirt and scratches.
No different expansion coefficients due to monobloc ceramic ferrule
Latched push-pull locking type
Local Area Network
FTTH and FTTX
Telcordia GR-326, IEC, TIA/EIA Standard compliant
100% Optical performance inspection and end-face geometric
Low Insertion Loss
Customized design and production
|Insertion Loss||≤0.40dB (Typ 0.2)||≤0.40dB (Typ 0.2)|
|Repeatability||Max change≤0.20dB||Max change≤0.20dB|
|Durability||1000 mate/demate cycles||1000 mate/demate cycles|
|Operating Temperature||-25℃ to +70℃||-25℃ to +70℃|
Fiber Optic Connector, Optical Fiber Connector, Fiber Connector,