60W High Power LED Street light with Bridgelux chip and Meanwell
|Dimension of Lights (L*328*98)||Net Weight|
Suitable for the street lighting at highways, urban roads and
stadiums, sidewalks, residential areas, industrial areas, squares,
villas, gardens and other places.
1) high quality power supply, input voltage 100-277V. The power
efficiency is more than 90%, power factor greater than 0.98, UL
2) Adopting Lepower led light sources and ZAG lens technology, 8%
light efficiency higher than the same type lights in the market,
with higher light transmittance up to 98%.
3) Duct type thermal design, reduce the weight of the light and
ensure good heat dissipation, lower luminous decay, and also extend
life span of the leds. Adopting the popular CHEM modular design,
effectively reduce the following maintenance cost.
4) Low energy consumption,matching high efficiency constant-current
driver, 60% energy saving; with good resistance to over-current,
over-voltage, lightning, high temperature, which fully ensure long
life span and high stability of the products.
5) Durable lights with long life span up to 50000 hours; No need
frequent replacements of lights and regular maintenance.
6) Green environmental protection, no UV light and infrared
radiation, no mercury pollution.
7) Nice appearance and non-fouling properties, Protection class
8) Work without strobe, fast transient response；A wide range of
9) 2pcs 1W chips are packaged in one led, which ensure high
stability and also reduce the death rate of the leds.
Efficiency of the Driver
The gross weight/Carton
Material of Housing
5.Light Distribution Curve Diagram
6.Luminous Decay Curve
At 25℃,LED working by 3250mA,continually lighting 8 hours a day,the
decay curve diagram:
7.Assembly and Installation
8.Operation and Storage Condition
Operation Ambient Temperature -40 to +50°C, Relative Humidity
Input Voltage 85~265V AC, 50/60Hz
Storage Ambient Temperature -40 to +85°C, Relative Humidity 10~90%
Mounting Height : Suitable for 5~10m height
Please handle the product with care when open the package.
Do Not Open the Light Engine
Do Not Soak the Floodlight into Water
Do Not Light up the System Without Grounding
Do Not Use Dimmer
If the new LED down light is found damaged, please keep the
original package and contact us.
In order to ensure the product work properly, please use the power
supply within indicating voltage range.
Lamps shall be installed and maintained by a qualified electrician.