PVC drinking water supply hose / pipe extruder machine
PVC drinking water supply hose pipe extruder machine is used to
produce pvc hose for drinking water supply.It could be produced by
not only single screw extruder,but also conical twin screw
This informations is from single screw extruder:
PVC drinking water pipe materials is hygiene grades,has these
1.No toxic,resistance to corrosion,it is not affected by chlorine
or bleach in water.
2.Good water conveyance ability,small flow resistance.
3.Ageing resistance,no scaling,no rust when under 50℃
water,compared with other plastics.
4.Non flammable,it will quench when fire away.
5.PVC pipes is convenient installation.
PVC small hose / pipe for water extrusion machine ( 6mm-20mm) Introduction:
1. Total installed power: 50Kw, 380 V three phases+N+G, 50HZ
Load factor: 55%-80% (Actual power is 40kw)
2. Cooling circulars water: 0.8 m3/h
3. Compress air:0. 8m3/min
4. Workhouse: 25000×2200×2200mm(length, width and high of line)
5. Products dimension:6mm-20mm
The PVC water supply hose extruder / extrusion machine(6mm-20mm) video:https://youtu.be/vA7VJBgi6Kw
PVC drinking water supply hose extrusion line / making machine features:
1.The optimum spiral structure feeding throat highly improves the
output of extruder
2.Accurate temperature control system ensures materials melting
3.Unique screw design achieves better plasticizing and high quality
4.Precisely designed gearbox with a high torsion guarantees stable
5."H" shape frame to decrease vibrating of extruder
6.Advanced PLC operation system realizes synchronization and
7.Adopt automatic water temperature & level control and special
independent filters on both vacuum and cooling tanks
8.Offer stable haul-off unit with 2-12 caterpillars
9.Provide saw & chip-free cutting options10.Low energy consumption, excellent performance, and easy
PVC water hose extrusion machine ( 6mm - 20mm ) Machinery Specification:
All the PVC hose pipe extruder / production line:
1. Automatic Feeder and drying hopper
2.Single Screw Extruder 65/28
3. PIPE molds (PVC)
4.Vacuum sizing and spray cooling tank
5.Belt haul-off unit
Technology and Service:
1. Seller supply full set of technical document, cutter and other
full document (write in English).
2. Seller supply training for buyer’s staff until buyer can produce
the eligible production independently.
3. Seller is responsible for installing, testing, adjusting and
debugging the machines in buyer’s factory.
4. Buyer should pay the expense for our engineers including for our
engineer including round-
way tickets, inland traffic, lodging and boarding fee when the
machine is installed, tested and maintained.
5. Seller will go to install machines after the machine is arrived
at buyer and buyer will have prepared all
conditions (including power, water, compress air, tools and
materials for producing pipe, etc) for installing
and testing these machines. Buyer should pay 60USD/day.
6. When installing,people of both sides cooperate well and
carefully,buyer supplies convenient working
condition,any problem, should discuss peacefully and kindly.
7. Buyer supply proper working tools, equipments and other
8. The expense including the accommodation and materials of the
run the machine for testing and other expenses(electric, water, air
and worker) will be on seller’s account,
if the buyer or their representatives do the inspection of the
machines before shipment.
9. Guarantee period: 14 months after shipment (the date of B/L)