Commercial Vegetable and Fruit Juice Extractor With Stainless Steel
Blade For Cafe Shop
Aluminum polishing body,s/steel blade,s/steel mesh filter
The juice can be pressed out rapidly and the dregs can be separate
Plastic draff bin is equipped for each unit
High quality industrial motor,high speed
1. Shinning Stianless Steel Housing.
2. All parts are dishwasher safe.
3. Pulp container: 2 L,Juicing Jar: 1 L.
4. Micro-mesh Filter made of Stainless Steel.
5. Juices at speed with the powerful 800watt Motor.
6. Juice hard or soft fruits with multiple speed settings.
7. Extra Large feeding tube swallows whole Fruit and vegetables.
drink shops, fruit shop, restaurants, hotels, bars, card rooms, tea
show, cafe, etc.
|Material||Stainless steel||Delivery time||20FT: 10days; 40HQ: 15days|
|Fuselage Size||340×270×360 MM||Output||80-100KG/HR|
|Package size||360×285×420 MM||Certificate||CE approval available|
|40' HQ loading||1550PCS||FOB Shanghai||USD|
|20' FT loading||650PCS||Warranty||1 Year|
Super wide feed opening can hold a whole apple with quick speed and
Powerful horsepower motor could produce 84% percent syrup at a
Special safely and convenient handle switch
Streamline project plastic body with five star qualities
A. Power supply of 110v-240v The power supply must have the safety
system to connect with the ground.
Please don’t replace the machine’s cable by yourself.
B. Check the lid whether lock closely with the bower centering (You
can pull the spigot of juice for cask
that made of stainless steel if it not move, it’s correct .If it is
lax you can readjust the lock pin
C.Connect to the power supply and turn on the machine, examine the
machine with your eyes and ears
to make sure the function normal before normal work.
1)Please clean the fruit or vegetable you want to squeeze before
squeeze and peel off the husk.(For
example :orange, watermelon).Some fruit like peach and apricot they
have the firm pip you must take
out them or it will shatter machine
2)Cutting the pulp into piece or block smaller than the size of the
ostium for putting the pulp. Then put them
into clean container. When turn on the machine you can put the pulp
into ostium continuously or use the fruit
pusher, then the fresh juice will pour from the ostium
3)If you want to change fruit or vegetable the machine worked in
normally, infusing clean water into ostium it
will be cleaned and the peculiar smell will be resisted.
If you want to clean or change the blade and centrifugation basket
after you use the machine over. You
must turn off the power then you can open the lid and screw the
nut, take out the blade, centrifugation
basket to clean completely (Don’t move the other parts lest should
effect the quality for boot-strap). Finally
install the parts with reversed sequence. Putting on the lid then
the machine can work normally again.