225L rapid-rate temp change test chamber wiht Non-fluorine
environmental refrigerant R448A,R23
This equipment is suitable for electrical, electronic, mechanical
and other products, parts, materials, etc. for low temperature cold
test, high and low temperature test and other products reliability
test,With temperature and humidity control accuracy and wide
control range,Performance indicators in line with GB5188.8.131.52.6-95
In order to make your test data more realistic and effective,The
test chamber must be used reasonably while meeting the following
The total mass of the load is not more than 80Kg per cubic meter of
studio volumeThe total volume of the load cannot be greater than
1/5 of the working chamber volume
On any section perpendicular to the dominant wind direction,The sum
of the load areas should be no more than 1/3 of the cross-sectional
area of the working chamber.Do not block the flow of airflow when
the load is placed.
|1.1Temperature Range||-70℃ ～ +150℃|
1.5Temperature Heating and
Heating rate: -40℃ to +120℃ Linear 5℃/min no-load
Cooling rate: +120℃ to -40℃ Linear 5℃/min no-load
|2.1 Humidity range||20%R.H～98%R.H|
|2.2 Control range|
|Temperature change rate designed according to IEC 60068-3 standard,
Sensors in the outlet and products.|
|Ⅴ. Chamber Structure|
|Overall structure and chamber was composed of three parts as below.
Insulation box, separate refrigeration units, and electrical
Workspace volume: W 700 × H 700 × D 480 mm
Exterior size: approximately W 1000 × H 1735 × D 2030 mm (not
including the machine protruding par)
wall material: high-quality carbon steel with static color spray
inner wall material: SUS304 # matte stainless steel plate
Insulation materials: rigid polyurethane foam insulation layer +
|3. Door||Single door. Heating wire was installed at the door frames to
prevent condensation at low temperatures.|
|4.Observation Window||Observation Window (W460*H560mm)on the door, with multi-layers of
electric painted heat hollow glasses to avoid condensation.|
|5. Lighting device||1 LED lighting device located on observation window.|
|6. Heating||High-quality nickel-chromium alloy wire heater, non-contact control
Steam heating and humidification method;
Stainless steel sheathed heater;
Heater control: contactless control (SSR);
Water level control device, heater anti-dry device.
|8.Water outlet hole||Available for drain the condensate water|
|8. Thread port||Diameterφ100mm port on the left chamber with rubber isolation plug
and plastic cover|
|9. Sample holder||One layers of stainless steel sample holder.Layer height
adjustable, Bearing weight 30kg/ layer|
|10.Mobile casters||Include mobile casters (with goblet)|
|11.Electric control box||Total power circuit breaker, over-temperature protection.|
|Water pump automatic supply|
How long will it take from order placement to goods delivery?
For standard environmental chambers, we have semifinished products
and finished products, the delivery
time is about 15days.For non-standard environmental chambers, the
delivery time is about 45~50 days.
Do you have any advantages in your price?
KOMEG production bases in Dongguan songshan lake district. At
present it is the largest scale producer
in environmental test chamber filed. We are looking forward to long
term cooperation business
relationship with customer, with the idea for small profits but
quick turnover, customer will get the most
competitive price from our factory headquarters directly.
How many certifications do you have ?
We have passed the CE certification, the ISO certification and
May I ask you how do you deliver these products?
We have several ways of delivery, such as FOB, CIF, DDP etc.
Which countries have your product sold to?
We have sold to so many countries, such as Russia, America, Korea,
Denmark, Vietnam, Thailand,India,
Singapore, Pakistan, Turkey, German, England and other more than 40
How long the warranty of your environmental chambers covered?
We provide free parts replacement service for accessories with one
What solutions will you provide if your products break down ?
We will give you guidance through video conference/picture when we
receive your notice of repair. If
necessary, we could also send our engineers to your country for
How to install and use the product?
The product is shipped with an operating instructions and video of
English version.For large walk in test
chamber that can't be put into the container, we will dismantled it
first and send our engineer for
If you face any problems in future during testing process we
promise we will give you a reply within 48
hours and solution provide within 3 working days. We can offer
operation video and English operation
muanual. We can provide video-conference. If customers require
on-site service, the transport and travel
expense shall be borne by customer.
We use PP Film wrapping the test chamber to protect the test
chamber from moisture or being scratched
first, then use strong plywood case for easyload and transport, and
to keep the chambers from potential
crash or impact.