Semi auto PET bottle blowing machine/5 gallon plastic water bottle
BJM-120A blow molding machine is a good machine designed for 5
gallon bottle water production factory, semi auto type operating
type can save investment budget for customer. It is mainly
applicable in blow molding cold filling and mesothermal filling PET
containers for drinking water, beverage, food, daily chemical
The semi-automatic 5/3 gallon blow molding machine / machinery /
equipment is especially used to produce 3 gallon and 5 gallon
bottles and is widely used to produce any shape of plastic from PET
with neck finishes from 15mm-200mm.
1.Perfect function with economic investment.
2.Small size and compact construction with no space waste.
3.Easy to operate and maintain ,operation by one person .
4.Saving power and uneasy to worn out ,Adopting new double crank
four bars to lock mould, the cross fixed. Providing high pressure
5.We can provide performs and various bottle& cap molds for 5
gallon and 3gallon bottles to meet customer’s requirements.
1. Mchine type: Semi auto bottle blowing machine for 5 gallon
2. Machine model: BJM-120A
3. Machine capacity: 80-120 bottles per hour
4.Suitable bottle size: Neck diameter: 15mm-300mm
Bottle boday diameter:120mm-300mm
5. Power consumption:48kw/10kw
Performance and Advantages
i. The man-machine interface is easy to operate. Everything is
computerized, including temperature adjustment and preform
ii. Preform unscrambling, loading, bottle handling and ordering are
all operated by stainless steel manipulator automatically without a
iii. The circulating chilling water system can protect the bottle
neck against deformation when the preform is being heated.
iv.The homothermal heater adopts auto reflection and closed loop
adjusting system which have the power supplied constantly in
proportion, not affected by the fluctuation of voltage. The
conveying chain is short pitched and paratactic, which helps to
realize slow heating and low power consumption. As a result, the
preform can be heated evenly and easy to blow.
iv. The positioned installation of molds makes it possible to
change molds easily within 30 minutes.
v. All the critical parts we use for the machines, such as the
electrical, hydraulic and pneumatic components, servo motor, etc,
are famous branded parts imported from Japan, USA and Europe,which
ensures the stability and long life of our equipments.
Whole production lineAuxiliary equipment of bottle blowing mahine
1. High pressure air compressor
The free air is compressed into clean and odorless high-pressure
gas, and the preform is blowed at high speed to form a bottle
2.5 Air tank
It is used for storing the compressed air from air compressor, and
prepare enough compressed air for bottle blowing machine
3. Water cooling machine
Cool down the water quickly, cool down the mould of bottle blowing
machine, protect the mould of bottle blowing machine, cool down the
product quickly, improve the product and quality..
4. Cooling dryer
The main function is to filter out the oil, water, impurities and
other wastes contained in the compressed air and work with the
Benjamin Machinery pays great attention to technology in the field
of water and beverage filling machine, bottle blowing machine,
water treatment system, juice processing system etx.
And we will try our best to satisfy your requirement, your message
will be highly appreciated. Welcome to Benjamin Machinery.