Plastic Machine PP PE PC Hollow Board/Sheet/Grid/Plate Extrusion
Machine /Production Line
Comparing of canton packing material and PP hollow sheet material
1, Paper - paper fear of water, fear of tide, perishable, can not
guarantee the quality of the product transport, there may be
increased costs, so most of the cartons, cartons, cardboard and
other paper products can only be used once.
2, PP hollow sheet related products can be flexibly produced,
compared to the expensive plastic injection box, PP hollow sheet
box cheaper many, customized according to customer size, thickness,
toughness, hardness, printing, etc.
3, Traditional cartons will be broken after several times of using,
the PP hollow sheet crates life is about 20 times of the carton
material, or even longer, it can reduce the using cost greatly.
4, And the PP hollow sheet products are non-toxic, pollution-free,
environmental protection, waterproof, moisture-proof, shock
absorption and other characteristics, compared with traditional
cardboard, wood, easy to use, easy to store, can be reused, long
life, but also recycling, Higher social and economic value.
Main technical specification
|Main motor power||185kw/22kw||132kw/22kw|
1. The softness of pull rolls could be customized on request to
extend its stretch.
2. The air capacity of hollow sheet and low pressure could be
adjusted and controlled slightly, which is easily to be controlled
than any other brand extrusion lines.
3. Unique T-Die is specially designed for PP hollow sheet. The
thickness of hollow sheet could be from 2mm to 10 mm with
twin-wall. The ribbed between walls could be rectangular and
4. Anti-UV co-extrusion layer could be one sided or two sided,
outer surfaces could be sandy or glossy according to configuration
High percentage of recycled flakes could be mixed with the virgin