Low Price Automatic 3L-5L Big Gallon Bottle Beverage Drink Liquid
Water Filling Plant Machine
The production line can automatically complete cleaning the tub,
sterilizing, filling, capping, shrink, bagging and transporting,
having functional and compact structure, and simple, it is a
mechanical, electrical, gas in one equipment.
The machine material is stainless steel,resisting corrosion and
easy to clean,the main electrial components and gas circuit
elements are all of international brand.
According to the customer's requirement,the machine could be
equipped with automatic cap separator,atoumatic leakage
inspector,automatic cap loader,shrink wrapper,etc.
Description Of Equipment
Automatic decapper is a special equipment for retrieving barrel. It
does not damage caps. This machine adopts computer control and its
capacity can be adjusted. Cap pulling organism from AIRTAC adopt
pneumatic adjustment, which solves the problems of tolerance of
barrel height and tolerance of barrel's mouth,and increases cap
pulling success greatly.
Decapping head: 3pcs
Jar size: Ф276×490×Ф56mm
Compressed air: pressure 0.5-0.6Mpa, consumption 400L/hr
Pneumatic cylinder drive
Outer Brusher is a corollary equipment for barrel water line which
produces mineral water and pure water. Bottom and outside surface
will be cleaned completely. The machine is made of stainless
steel,it is anti-corrosion and easy cleanable. Adopt bottle-jamming
inspection device to decrease damage rate.It is well designed with
reasonable structure and high efficiency, operating stably with
Pneumatic components: AirTAC
AC contactor: Schneider/SIEMENS
Bearing has good waterproof structure.
Starwheel motor:Shanghai 0.75kw
Washing pump: CNP 0.37kw
3,Bottle Washing Machine
15 steps for washing: 1-2 steps of hot alkaline water; 3-4 step of
recycled water rinsing; 5-7 steps of
acid water; 8 step of dripping; 9-10 steps of recycled water
rinsing; 11 step dripping; 12-14 steps of pure
water rinsing; 15 step of dripping.
Disinfectant recycled on side, convenient for sampling and
inspection. Each tank has low level alarming device. Chain moving
for cleaning. Double-layer board avoids water mixing. High speed
filling valves. Adopt chain type pressing caps.
Air source:pressure 0.5~0.6Mp,consumption 350L/M
Structure: transmission controlled by PLC.
Configuration (lye tank leaves steam joint)
Pneumatic components: AirTAC
AC contactor: Schneider
Main motor: Shanghai Bolong
Equip automatic cap sorting and loading system
Equipment automatic malfunction protection device
4,Filling-capping 2-in-1 Monoblock
1. stainless steel insert type filling nozzle, two times high
precision filling, filling volume adjustable.
2. Water pump is equipped.
3. Mitsubishi PLC controlling system, all full-automatic working,
Schneider & Omron brand other electric parts
4. With AIRTAC brand air cylinder, F.R.L. Combination and solenoid
valve for air cylinder.
5. Machine frame and body: all 304 Stainless Steel, combine with
clear fiber glass windows
Filling head: 8 pcs
Power supply: 380V 50Hz 3 phase (adjustable )
Air consumption: 0.5m3/min
Suitable to Φ270×490 bottle (3,4,5 Gallon Bottle )
More associative equipments
5,Heat Shrinking Machine
Electrical heating produces hot steam,barrels with full water after
light inspecting are sleeved with plastic labels, then they enter
steam paths to make plastic labels molding.
Material of machine body and pipeline: 304 Stainless Steel.
With two thermal inside
Automatic water lever control
To check the filled bottle full filled or not, and to check if have
any impurity in the bottle water.
7.Automatic bagging machine
Cap elevator is equipped with testing switch, when caps are
consumed to a certain degree, testing switch will signal to start
feeding. There are certain amounts of caps in the cap store, which
will be elevated into the capper by belt.
9,Bottle Conveyor Belt
More information pls contact :
+86 138 1284 5656
Zhangjiagang Sunswell Machinery Co., Ltd