Home >

Hot Stamping Pvc U Joint Profile Extrusion Plastic Easy Maintenance / Install

Categories PVC Decoration Profile
Brand Name: TONGXIANG HENGCHAO
Place of Origin: CHINA
MOQ: 5000 Meters
Price: USD 0~5 Per Meter
Payment Terms: T/T, L/C
Supply Ability: 20000 Meters Per Day
Delivery Time: 5-8 Days
Packaging Details: BAGS/CARTONS/PALLETS
Material: PVC Decoration Profile
Color: Customized
Section: Customized
Usage: Customized
Surface: Hot Stamp
Molding Method: Extrusion
  • Product Details
  • Company Profile

Hot Stamping Pvc U Joint Profile Extrusion Plastic Easy Maintenance / Install


Hot Stamping Pvc U Joint PVC Extrusion Profiles Easy Maintenance / Install Customized


PVC Extrusion Profiles Detailed Description


Profile Type

PVC U joint, accessories for installing pvc wall and ceiling panel


Color Finishing

Hot stamping surface, color can be same as pvc panel


Suitable Size

5mm to 10mm thickness


Length

Usually be 40pcs/bag


Payment

T/T, L/C


MOQ

Match the quantity of pvc panel


Delivery Time

Within 15-20 days after receiving deposit



PVC Extrusion Profiles Features
1. Fire proof, rot proof , damp proof and rust proof


2. Water proof and heat proof


3. Easy maintenance


4. Impact Resistant


5. Light in weight and easy to install can save a lot of time and man power cost.


6. Easy to cut, drilled, nailed and sawed. PVC Wall Ceiling Panel


PVC Panel Installation
1. PVC Panels may be nailed, stapled or screwed through the panel edge groove base flap into plumb
and level wooden battens, or bonded direct to flat, plumb, sound and smooth walls or ceilings. If the
installation sub surface is uneven install an appropriate timber batten frame system to the wall or
ceiling to ensure a level batten frame to apply the panels to.


2. Installation of PVC panels should commence by attaching a scotia trim or end U Joint as required
to the wall, and or, ceiling edge joint.


3. Mechanically fix or adhere the end cap/starting profile to the wall. For wet area applications apply
a full length unbroken bead of silicone sealant into the channel of the starting profile.


4. If gluing panels to the wall, ceiling or framework, apply multiple full length beads of panel adhesive
to the back of the panel and angle it into the starting profile. Alternatively if a wooden frame sub
system is installed and nailing installation is to be used, locate the panel in position and staple or pin
through the groove base flap into the wooden framing. For wet area applications apply a small
silicone bead along the upper tongue face of the next panel. Locate the next panel tongue into the
groove of the previously installed panel and fix in the same manner as the first panel. Remove any
excess silicone once the profiles are located.


5. Continue across the sub surface or frame, using the same techniques per panel or H type trim
mid-joints can be used if required. In some cases it may be necessary to cut off the tongues or
grooves before fitting into any profiles used.


6. Use an internal or external corner trim at wall corners or returns.


7. Finish the installation of the panels by measuring and cutting the last panel to size. Finish and seal,
(for wet area use) the final edge using silicone sealant, and either an end U cap or scotia trim to the
panel edge as required, prior to fixing to the final panel and end trim as one unit to the sub surface.


8. Ensure all panel ends and edges around sinks, baths, shower trays, shower units and any pipes or cut
outs are fully sealed using silicone sealant. The PVC panel warranty will be void and no product fault
claims will be accepted, where a problem occurs due to incorrect or inappropriate sealing of joints or
seal failure as a result an inappropriate sealant being used.


9. When fixing any accessories or heavy items to the panel surface ensure that the screws used to
fix the item locate securely into the wall or battens as PVC panels are a thin cellular product and
therefore the PVC material itself has limited holding capacity. Do not over tighten screws / accessory
base plates or compression damage to the panel surface may occur.

NamePVC Co-extrusion Profile
ColorWhite/Black/Grey/Customized
MaterialVirginal PVC Granules
SurfaceMatt/Shiny
HardnessRigid
CertificateISO9001,REACH,Rohs,SGS
PackageShrink wrap/Carton/Pallet

Applications:


· Make the production by your own drawings.

· These production are mainly customized by the customer,like length,color,surface and so on.

· These production could instead of some metal section ,and be used for some structure or decoration parts.


Usage:


· Mainly used as the decoration profile,could instead of metal appearance profile.

· It looks like painted or coated,but it doesn't.

· It is made of co-extrusion,its surface hardness is much better than painting or coating.


Features of Plastic production:


1. Lifetime No Rot Warranty
2. Will not crack, split or warp
3. No Insect Damage and Ready to Install
4. Factory Applied Readi-Finish
5. Low Maintenance
6. Moisture & Termite Proof Material
7. High Energy Efficiency• Repaint able with Oil or Latex Paint
8. Does Not Promote Mold or Mildew
9. Installs with standard wood working equipment


The Overview of Tongxiang Hengchao Plastic Co.,Ltd

Glimpse of Tongxiang Hengchao Corner


Cheap Hot Stamping Pvc U Joint Profile Extrusion Plastic Easy Maintenance / Install for sale
Send your message to this supplier
 
*From:
*To: Tongxiang Hengchao Plastic Co.,LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly