Model 1200B China gold mine wet pan mill price in Sudan for sale
Wet pan mill full name is wet grinding machine,according to the
different operating methods, devided into roller gold machine,mixed mercury grinding, grinding
For a variety of ferrous metals,non-ferrous metals,non-metallic
mineral grinding operations,as well as dilute precious metals,gold and silver
grinding,selection,processing operations is the majority of small and medium-sized concentrator milling plant the best first grinding
1. Small investment,high output.
2. Easy installation and maintenance.
3. Good effifiency.
4. The roller is wearproof.
It is mainly applied for grinding
gold,silver,lead,zinc,iron,molybdenum,copper,antimony and so on. Different model of the wet pan mill can used for the different ore, such as 1200 are usually used for gold ore.
Working principle :
This equipment adopts the working mode of wheel-driven grinding:
firstly, the motor drives the power to the reducer, and under the drive of the reducer, the torque is
transferred to the horizontal shaft abovethrough the big vertical shaft, and then the torque is transferred
to the roller through the pull rod installed on both ends of the horizontal shaft, so that the roller
generates driving force and rotates counterclockwise along the horizontal axis.The roller can rotate
around the big vertical axis of the wet roller and rotate around the center axis of the roller.The added
mineral material is crushed thoroughly after repeated extrusion, kneading and grinding by the extrusion
pressure brought by the weight of the roller itself and the huge friction generated by the roller during
its revolution and rotation.
A. Only when the wet pan mill/ gold ore grinding machine run
smoothly then start to feed the raw material into the grinding pan.
B. The gold grinding machine/wet pan mill is prohibite to start
work with raw material inside, it must clean the residual ore in
the middle of grinding pan and then start the machine.
C. Uniform feeding, shall not be more and less, it will be better
to use the feeding machine.
D. Bearing parts must often add grease oil and gear oil.
E. Often check if the screw is loose.
F. If found the bearing is damage, pls change it timely just in
case the eccentric shaft damage other components.
G. When the machine is on work, pls pay attention to the reducer
and bearing part, to find if it has some abnormal noise, high
temperature and high motor current accurs is not allowed. Once it
happens, the machine should stop working immediately.
H. When repair the machine, pls remove the V-belt to keep the
machine in a safe condition.
|Impeller power||kw||Y6 level 5.5KW|
Chrome material roller:Introduction of core technology ,wear-resisting improve>130%,the surface is smooth and without porosity