Vortex gas flow meter MT100VX series from METERY TECH.

--------------------------------------------------------

www.meterytech.com

Picture of Vortex gas flow meter MT100VX

Product Description

Parameter of vortex flow meter
Measured Mediums	liquids, gases and steams (NOTE: the mediums should be unidirectional or can be seen as unidirectional.)
	When the dryness of saturated steams ≥85%, they can be seen as unidirectional.
Temperature of Mediums	- 40°C ~ + 350°C
Pressure of Mediums	1.6MPa, 2.5MPa, 4.0 MPa
	For over 4.0 MPa, please contact us freely, for it needs special customization.
Accuracy	1.0; 1.5
Span Rate	1:8 ~ 1:30(compared with the standard atmospheric pressure)
	1:8 ~ 1:40 ( compared with the nominal temperature water)
Flow Range	Liquids: 0.4 ~ 7.0 m/s
	Gases: 4.0 ~ 60.0 m/s
	Steams: 5.0 ~ 70.0 m/s
Nominal Diameter	DN 25, 40, 50, 65, 80, 100, 125, 150, 200, 250,300 mm
Materials	1Cr18Ni9Ti
Reynolds No.	Normally, 2*104 ~ 7*106
Resistance Coefficient	Cd ≤ 2.6
Licensed Vibration Acceleration	LUGB type ≤ 0.2g
Class of Protection	IP65
Class of Explosion-Proof	Intrinsically Safe Explosion-Proof: Exia II CT2 ~ CT6
	Explosion Suppression: Exid II CT4
Conditions of Surroundings	Temperature of Surroundings:		Non-Explosion Proof Surroundings: -40°C~ +55°C
			Explosion-Proof Surroundings: -20°C~ +55°C
	Relative Humidity:			≤ 85%
	Atmospheric Pressure:			86 ~ 106 kPa
Power Supply	Non-Explosion Proof Type	Pulse type:			+12 VDC ( the output current is 4 ~ 20mA)
		Current type:			+24 VDC ( the output current is 4~ 20mA)
	Explosion-Proof Type	Current type:			+24 VDC ( the output current is 4~20mA)
Output Signal	Frequency pulse signal 2~3000Hz, low level voltage ≤1V, high level voltage ≥ 6V
	Two-wire system 4 ~ 20mA signal (isolation output), load ≤ 500Ω.

Measuring range of vortex flow meter MT100VX

Measure range of vortex flow meter
Diameter (mm)	Water	Gases in the Normal Temperature and Pressure
	Range of Standard Measurement (m3/h)	Range of Standard Measurement (m3/h)
25	2 ~ 16	8~60
32	1.5~15	14~100
40	3~30	18~180
50	4~40	30~300
65	6~60	50~500
80	13~130	70~700
100	20~200	100~1000
125	36~360	150~1500
150	50~500	200~2000
200	100~1000	400~4000
250	150~1500	600~6000
300	200~2000	1000~10000

Installation cautions

Pipes must be fully filled with liquids, it is essential that pipes remain fully filled at all times, other ise flow rate

indications may be affected and measurement errorsmay be caused.

Installation length required

Wafer Installation Diogram

.

At your service

Our principle is "Reputation from Services&Quality is the lifeline of enterprise", so besides our product, satisfactory

services is our another competitive hand.

--------------------------------------------------------

www.meterytech.com

To World, METERY is Just A Company, But to METERY, You Are The World...

METERY TECHNOLOGY LIMITED

has always specialised in the manufacture and supply of flow meter and flow measurement devices. We can supply a wide range of flow meters from simple low cost of variable area flow meter to high accuracy Turbine flow meter and electromagnetic flow meter, as well ultrasonic level sensor, radar level sensor, magnetostrictive level probe, floating ball switches.,etc

  We manufacture and stockhold liquid flow meters,solid flow meters and gas flow meter types including water flow meters in many sizes.

  Dalian Metery Tech. Co.,Ltd can offer flow meter for many applications such as fuel flow meter, oil flow meter, diesel flow meter phosphate esters, water, water-based fluids, air other compressed gases and petrol flow meter types.

  With our chemically resistant, high accuracy digital flow meter designs with pulse outputs, we can handle almost any fluid. For hazardous areas turbine meters can be supplied with ATEX Intrinsically safe pick off coils.

  We have a large range of secondary display instrumentation to choose from with flow rate, total flow throughput, retransmission, batching and scaled pulse option.

  Electromagnetic flow meter are available in full bore and insertion type designs. The displays on these can show both flow rate and flow total.

  Dalian Metery Tech. Co., Ltd are experts in the selection and supply of flow measurement equipment and any type of flow meter can be specified and supplied. We also stock hold hundreds of low cost all plastic variable area types for quick delivery. They are available with low/high flow switches and transmitters.

  We are well placed to provide many types of instruments on very short lead times. With shipments of most meters in 2-5 days our "promise to ship" rate is at 99.5%.

To World, METERY is just a Company, But to METERY, You are the world...