Digital Display Control Mode Instant Hot Water Taps CE Approved and Instant Heating Type

Instant hot water tap
1. Save Power
The product adopt genuine terminal heating mode,so water will be hot as soon as switch it on , no need warm-up, no need insulation, no pipeline heat loss, saving pipeline heat loss 10-20% compared with storage-type caused by collection water supply, saving pipeline remaining energy wasted 5-10%, so calculated by scientists, the product save power 20-50% than storage-type electric water heaters, energy utilization rate reach more than 95%.
2. Water-saving
normal storage-type electric water heaters ' pipeline consumption are very much. Average one time, emptying pipeline cold water will loss 2.5L-5L water, if one day use 20 times the amount of loss is 50L-100L, Rapid Water Heater heat up very quickly,no pipeline water loss, every time water loss is almost equal to 0 .
3. Save time
This product's heating speed is very quick, water will be hot as soon as switch it on ,save time.as soon as open switch, the power will be connected automatically, within five seconds hot water will outflow, very fast, easy to use, avoid storage-type electric water heaters waiting helpless. Truly meet modern fast pace of life demands.
4. Security
Real water & electricity isolation , isolation voltage is more than 1500V; wall-call design, from structure ensure that electric leakage does not hurt people; high sensitive built-in electric leakage protection (optional), use technology to protect your safety; the main body's grounding is reliable ,traditional but also reliable protection measures; anti-dry design, ensure that water automatic power-on ,anhydrous automatic power-off; avoiding Ultra-high water pressure design, reflects meticulous care of security; completely relieve your worries.
5. Durable
adopt imported heat resistant engineering plastics; superior ceramic disc, 50-year water-tight; electrical contact average life is more than 10 million times; heating element continuous use life is more than 5 thousand hours; no need pave hot water pipes, water leakage potential safety hazard reduce 50%.
6. Convenient and comfortable
within 5 seconds repid outflow hot water, water temperature remain constant; nozzle can be rotated to facilitate the use of double sink; hot & cold water can be dual-purpose; water temperature can be adjustable between 30-60 degrees; Compact Size,beautiful appearance; easy to install, suitable for all kinds of renovated homes.

Suitable both Flat roof and Pitched roof

OUR SERVICE
1, Fast delivery, 40 feet container quantity will deliver in 7 days.
2, Experienced sales team assistant you, fast confirmation for every related questions from you.
3, Rich experiences for differenct Market (countries), kinds of customized design will be welcomed.
4, Assistant you load other goods with solar water heater in one container.
5, Installation guide and train
6, LOGO print and water tank and cartons.
FAQ
1. Is solar water heating a viable alternative to gas or electricity?
Solar should not be seen as a alternative to gas or electricity, but rather a supplement. Solar cannot totally replace the need for gas or electric heating as there are sometimes days when there is little sunlight. When averaged over a year, a correctly sized solar system can provide 60%-70% of a household's hot water needs. Providing more than this is unadvisable, as too much heat will be produced in the summer. The hot water system system can easily be automated so hot water is guaranteed regardless of sunlight levels.
2. How long will it take to recoup my investment?
QIRUI solar collectors are much more affordable than many other solar hot water heaters. For a household of 4, the price of a full system may not be too much more than a new electric or gas system. Depending on you location (solar levels) and current hot water usage the annual electricity or gas saving will differ. However in a normal household that spends 25% of its electricity bill on hot water heating, the full cost of the purchase may be recouped as quickly as 4-5 years in reduced bills. You will definitely make considerable savings during the life of the solar hot water heater.
3. Can QIRUI solar collectors be used in cold conditions?
Yes. QIRUI collectors can be used in temperatures as low as -30oC, although performance is greatly reduced in such extreme conditions. Good heat output is still achieved in mild sub-zero conditions.
4. What happens if one of the tubes is broken?
Firstly, tubes are very strong and not easily broken, but if the worst should happen, solar tubes can be replaced very easily. They are inexpensive and available though your local QIRUI distributor. The HAINING QIRUI solar collectors can operate with several broken tubes, but the efficiency will be reduced, so it is recommended that broken tubes be replaced immediately.
5. Will water be heated on a cloudy day?
Yes. Although the heat output of the solar collector is reduced on overcast days it will still be able to provide heating. If it is a heavily clouded day or raining, then more gas or electric boosting may be required to maintain water at the required temperature. This system will be automated so you don't have to worry about running out of hot water on a rainy day.
6. Can I use a solar collector with my existing hot water system?
Normally yes. Simple retrofit valves can often be used to allow solar to connect to your existing cold water inlet. If your tank cannot accept the solar input directly an additional storage tank can be installed to pre-heat the cold water prior to entering the existing tank.
7. Are the solar collectors noticeable on the roof?
If only the collector is mounted on the roof it should blend into the roof design quite well. HAINING QIRUI solar collectors are very thin and can be flush mounted on a roof. From a distance they look somewhat like a skylight. You may have to check with your local council regarding building restrictions when installing your solar collector. Click here to view installation photos.
8. Can QIRUI solar collectors be mounted on a flat surface?
Yes they may be mounted on a flat roof, or on the ground by using a stainless steel Flat Roof Frame. The collector should be installed at a minimum of 20o angle to ensure optimal heat pipe operation.
9. How do I protect my solar system during subzero temperatures?
If you have a system that is operating in areas with subzero temperatures then freeze protection must be implemented. The easiest means of preventing freezing is to use a controller with a low temperatures setting, so when the manifold temperature drops below a certain pre-set temperature (5oC/40oF), the pump will circulate, warming the collector with water from the bottom of the storage tank. The pump will not run continually, just periodically, the frequency of which will depend on the outside temperature. In extremely cold areas, a closed loop using a glycol/water mix may be appropriate.
10. Will the QIRUI solar collector be a fire hazard during hot, dry weather?
No. The QIRUI solar collector's components are all high temperature rated and non-flammable so even during strong sunlight with the circulation pump turned off (stagnation), the system will not catch alight or give off any sparks. The majority of the solar collector's components are stainless steel, aluminium, glass or glass wool. The manifold outlet should be fitted with a temperature relief valve, which will prevent the manifold temperature from exceeding 99oC / 212oF.