Automatic Ribbing Folding Machine, Solar Water Heater Production Related Machine

Automatic Ribbing Folding Machine, Solar Water Heater Production Related Machine

1. L2000mm Open Type Automatic Inner Barrel Tube Ribbing Machine
Product description:
The device is mainly used for folding a reinforcing rib on both sides of the vacuum tube hole of the solar water heater, and placing the vacuum tube hole on a plane, which increases the strength of the vacuum tube hole by 2-3 points, and also achieves the tube hole not deformed during operation, is solar energy One of the necessary equipment for the water heater manufacturing industry.

Technical parameter:

Features:
1) The equipment is welded by steel plate and other steel sections.
2) The equipment uses compressed air to lift and lower through the cylinder as the upper and lower compression power.
3) The device adopts a simple locking device, through the lifting and lowering of the cylinder, the cylinder is fastened to the working position tightly during the work, and the workpiece is extracted after the locking device is finished.
4) When using, put the front end of the cylinder into the positioning slot, and then press the up and down button of the cylinder to press the cylinder and the rib guide rail, start the motor power supply, move the pressure roller, and make the rib machine move from the back to the rear to reach the rib. One purpose for molding.

2. L2000mm Automatic Pneumatic Outer Barrel Ribbing Machine
Working conditions:

Technical parameters & requirements:
1) Rated voltage: 380VAC 50HZ
2) Rated power: 1.5KVA
3) Folding height / width: according to customer requirements, if there is no special requirements, can be made according to conventional requirements.
4) Compressed air pressure: 0.25 mMpa ~ 0.6 mMpa
5) The electrical part of the warranty period is one year.
6) The device can compact the water tank that has been buckled, and is formed at one time. The working speed is fast and the water tank seam is straight and fast, and the appearance is beautiful. It is an ideal flat mouth equipment for various thin plate barrel containers.

3. L2000mm Automatic Folding Machine
The scope of application:
The equipment is suitable for pearl plate, aluminum-zinc-plated, stainless steel, fluorotitanium plate and other materials. It is suitable for folding and pressing in the range of L2000mm, and the thickness of the workpiece is 0.4-1mm. The cylinder diameter ranges from 100 to 500 mm.

Manufacturing methods and standards:
1) The mold is made of carbon tool steel and processed by finishing milling and grinding. Surface heat treatment.
2) The fuselage is made of high-quality carbon steel plate Q235 welding, the materials are exquisite, to ensure the rigidity of the fuselage, the level of small deformation.
3) The cantilever is made of 45 steel, and the large lathe and external grinding machine are used to process the outer circle. Milling slots with large gantry milling. After heat treatment, cold pressing, chrome plating and other processing processing. Good rigidity, high surface hardness, wear resistance, and rust resistance.
4) The cantilever pneumatic support part, the system is fine, accurate positioning. Can withstand cantilever pressure.
5) The balance arm is made of 45 steel, and the outer circle is processed by a large lathe. The welding picking arm is precise, ensuring that the cylinder is synchronized up and down.
6) Other parts are based on the standards of national equipment manufacturing and processed through multiple processes. The specific standards are based on internal standards.

Acceptance methods and standards:
The working speed of the equipment is 15 times/minute, each barrel needs 4 times to complete the process (including jigsaw), manual loading and unloading, high work efficiency, beautiful appearance and stable performance. It is the ideal folding edge for all kinds of thin plate barrel containers. Press-fit integrated equipment.

Working Sketch:



4. U-shaped Foam Line
Product description:
The production line is a horizontal-track circulating solar foam production line with 18-36 stations (station to be determined). It adopts U-shaped car type and is driven by motor reducer. The production line is mainly composed of manual clamping, manual clogging, cycle driving, (clamp closing), manual charging, heating and curing cycle, manual cutting and foaming. The production line can be continuously cycled, can also work step by step, has the characteristics of compact structure, simple operation, stable transmission and high production efficiency, and is widely used in solar mass foaming production.

Technical parameters:
1) Filling form: vertical manual charging
2) Filling medium: POL+ISO (CFC11 or HCFC141b)
3) Production line work beat: about 60 seconds (depending on the level of worker proficiency)
4) The number of stations: 18-36
5) Gas capacity: 1/2" (0.5MPa)
6) Oven temperature: 50 ° C ± 10 ° C
7) Capacitance: about 50KW (380V, 50HZ)
8) Curing time: ≥ 20min
9) Electrical programming is fully imported.
10) The electrical part of the warranty period is one year.

Related equipments:

Metalwork Machinery (Wuxi) Co., LTd., was established in 2006, specializing in cutting and welding automation manufacture, sales, and services with more than 10 years experience.

Our products ranges: CNC flame and plasma cutting machine, CNC fiber laser cutting machine, arc welding machine, automatic resistance welding machine, automatic seam welding machine, H beam and box beam production line, robotics welding and cutting stations, etc.  We also can produce the customized machine according to customer's workpiece.

Moreover, we are specialized in "whole solution" of production lines for our customers, we not only supply you the individual equipment, but also delivery a solution for your project. This will bring you more values from us.

With regard to the welding equipment industry, advanced technical well-know in design and production activities and long term experience, we provide important technology and innovations for tank, pressure vessel, boiler,ship building, nuclear power, electric power station, manufacturing processes. We not only sell the equipment, but also delivery value to customers.

Service is our specialty, after long time cooperation, you will satisfy more with us.

If you have any queries, please do not hesitate to contact us by phone or E-mail. We will revert to your questions, within 24 hours after your requests.

Nearby locations:
PVG Pudong airport, 178Km, by train: 50 min
Wuxi Airport: 35Km, by car: 50 min
Peking Airport: 1100Km to Wuxi, 2hrs by plane
Shanghai Port: 145Km, 2hrs by truck
Wuxi Railway Station: 25Km, 40 min by car