Circulating Alumina Al2o3 96% Ceramic Pump Seal

96% Alumina Ceramic Pump Seal Ring Pump Component Circulating Pump Anti-corrosion

Introduction

The ceramic face seal ring is to plug the gap between the housing and the rotating shaft so tightly that no liquid or gas may escape. This leakproof seal is achieved by means of a rotating sealing surface at the point of shaft entry. With their outstanding thermal conductivity, low heat expansion coefficient and high Young's modulus, high-performance ceramics minimize any deformation to the face seal or packing ring under mechanical and thermal loads. Alongside such resistance to corrosive media it is the tribological properties of the sealing system that figure predominantly in the selection of material. The important factor is whether or not the seal gap is lubricated by a fluid medium (be it liquid or gas). For this reason there is standard combination of materials. If there is lubrication in the system, ceramic to ceramic matings are possible. In other instances, one of the two componentsmust possess lubricating properties. One well proven combination consists of ceramics to carbon graphite.

Advantages of zirconia parts:

·High wear, heat, pressure, and chemical attack resistance (gas and liquids)

·Extreme hardness

·Excellent electrical insulation

·Relatively lightweight

Application:

Because zirconia has good properties of elasticity module and high hardness, as well as the above good properties, the parts made from zirconia are often used as mechanical or pump seal plate or disc.

About Us

Suzhou Jingci Super Hard Materials Co., Ltd has specialized in precision ceramics for more than twenty years and has rich experiences in designing and developing technical ceramic solutions for a wide variety of applications. Jingci has the capability to provide customers with expertise to make sure the best design and materials are made for their specific application and needs

Suzhou Jingci Super Hard Materials Co., Ltd (hereafter referred to as Jingci) was founded in 1999 and located on Pujin Road, Linhu Town, Suzhou, and is close to Taihu Lake Scenery Resorts.

Jingci Specializes in production, researching and development of parts made of alumina(AL2O3), zirconia (ZrO2), silicon carbide(SiC), silicon nitride(Si3N4), as well as customized products.

Each high quality ceramic product comes from our advanced management concepts, skilled technical staff, matured manufacturing workmanship, in addition to advanced equipments. Customer’s satisfaction is our greatest pursuit. Professionality makes excellence!

Jingci will make sustaining efforts to provide fine ceramic solution for customers around the world, whose visit, guidance and win-win cooperation are warmly welcome